RDL STSH2

ST-SH2

OUR PART #:  STSH2 Write the First Review.

Our Price: $134.15
List Price: $179.43
You save 25%!
  • Stereophonic Headphone Amplifier
  • Provision for External Stereo Level Control
  • Balanced or Unbalanced Input
  • Bridge a Line and Feed Headsets
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
In Stock
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. For fixed level installations not requiring user volume control, the ST-SH2 is wired to the audio source and to a headphone jack. Frequently, it is desirable to mount a volume knob by the headphone jack. The LEVEL ADJUST terminals (L) and (R) may be wired to the respective wipers of a stereo 10 kO potentiometer to provide volume adjustment. It is recommended that the ST-SH2 be located less than 39" (1 m) from the jack and volume control.

The exceptional low noise (better than 100 dB below operating level), low distortion, audio clarity and excellent crosstalk performance makes this module ideally suited to a wide variety of demanding audio applications. Use this module in conjunction with other RDL® modules as part of a high quality, flexible audio/ video system.

Features:

  • Stereophonic Headphone Amplifier
  • Provision for External Stereo Level Control
  • Balanced or Unbalanced Input
  • Bridge a Line and Feed Headsets
  • Amplifier To Drive High or Low Impedance Headsets

Specifications:

  • Inputs (2): 10 kO balanced or unbalanced, bridging
  • Input Signal: -20 dBu (-22 dBV) to +6 dBu (for normal output level: +4 dBu, 100 ù) -10 dBu to +16 dBu (for 250 mW, 8 O output)
  • Output Load Impedance: 8 O to 5 kO (drives low or high impedance headphones)
  • Output Signal (normal rated): +4 dBu into 100 O
  • Output Signal (maximum): 250 mW into 8 O, 20 Vp-p into 2 kO
  • THD+N: < 0.005% (0.0015% typical @ 1 kHz)
  • Frequency Response: 20 Hz to 40 kHz (+/- 0.25 dB)
  • Noise: < -100 dB below normal operating level
  • Total Dynamic Range: > 115 dB
  • Gain: Adjustable from -2 to 24 dB
  • CMRR: > 50 dB at 100 Hz
  • Crosstalk: < -65 dB (10 Hz to 20 kHz); < -80 dB @ 1 kHz
  • Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 175 mA

Note

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL STR19A STR-19A

RDL STR19A STR-19A

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
$141.35 List Price: $189.08You Save 25%
In Stock
Free Shipping AvailableFree Shipping
RDL DRA-35S  Din Rail Adaptor for STICK-ON

RDL DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
$20.06 List Price: $23.67You Save 15%
In Stock
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
$24.18 List Price: $32.35You Save 25%
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
RDL STRRB1 ST-RRB1

RDL STRRB1 ST-RRB1

Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
$23.44 List Price: $27.65You Save 15%
In Stock
RDL STR19B STR-19B

RDL STR19B STR-19B

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
$168.05 List Price: $224.79You Save 25%
Please call for availability.
Free Shipping AvailableFree Shipping
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 6-10 business days.
RDL SR10 SR-10

RDL SR10 SR-10

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
$67.63 List Price: $90.45You Save 25%
Usually ships in 4 business days.
RDL SR12A SR-12A

RDL SR12A SR-12A

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
$67.63 List Price: $90.45You Save 25%
Usually ships in 6-10 business days.
RDL STPBR4 ST-PBR4

RDL STPBR4 ST-PBR4

Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
$35.78 List Price: $47.84You Save 25%
Usually ships in 6-10 business days.
RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
$33.98 List Price: $40.10You Save 15%
Usually ships in 6-10 business days.
RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
$28.96 List Price: $38.73You Save 25%
Usually ships in 6-10 business days.
RDL DTB-RDL Dtb Rdl Detachable Terminal Block

RDL DTB-RDL Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
$7.15 List Price: $8.44You Save 15%
Usually ships in 4 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information