Electro-Voice EVID 4.2W 2-Way Twin 4" Woofer and 1" Ti Tweeter, Pair, White

The Electro-Voice EVID 4.2 is a very compact full range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. It’s shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications

The 4.2’s three-dimensional elliptic baffle symmetrically locates the 1” Ti high frequency element with a Coherent Coverage Waveguide in front of, and between the 4” low frequency drivers. This careful shaping, location, and 10° splaying of the lf units provides coverage control by the resulting line array. Lobing is controlled by physically “shadowing” the lf transducers from each other over the bandwidth they would normally exhibit interference. EVID’s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety.

Electro-Voice EVID 4.2W Features:

• Line-array enhanced coverage control
• Organic, unobtrusive shape
• Strong-Arm-MountTM for easy, flexible aiming
• Full-bandwidth overload protection
• Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34
• Dual LF transducers for extended bass and greater power handling and output
• Ti direct-radiator HF transducer, Neodymium structure
• High sensitivity
• Magnetically shielded
• Zinc-plated grilles
• Transformer Versions

Electro-Voice EVID 4.2W Specifications:

• Frequency Response(-10 dB): 65Hz - 20kHz
• Power Handling: 200W Cont. Prog./400W Peak
• Sensitivity: 89 dB, 1W/1m
• Impedance: 8 ohms
• Max SPL: 113 dB
• Horizontal Coverage: 120°
• Vertical Coverage: 80°
• Crossover Frequency: 2.2 kHz
• LF Transducer: 2 x 4” (100 mm)
• HF Transducer: 1” (25 mm)
• Protection: Full System
• Weather Resistance: Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splash-proof ratings
• Swing x Rotation: 100° x 90°
• Terminals Phoenix: Connector
• Enclosure Material: ABS (paintable)
• “t” Version Wattage Taps:
  • 70V: 3.75 W
  • 70V/100V: 7.5W, 15W, 30W, 8 ohm bypass
• Dim (H x W x D): 12.2” x 6.9" x 8.5” (234 mm x 127 mm x 165 mm)
• Net Weight (each): 8.5 lbs (3.9 kg)
• Shipping Weight (pair): 19 lbs (8.6 kg)
• Included Accessories: SAM, hex key

Note:

Image shown above is for illustrative purposes only; actual product comes in White. For more information on this and other products, contact your Sales Representative.