Audio-Technica PRO 47TL ProPoint 15.79" Cardioid Condenser Thread-Mount Gooseneck Mic

Superior performance along with integral power module and ⅝"-27 adapter-mount all contribute to make the PRO 47TL ProPoint® double-gooseneck cardioid microphone ideal in a variety of installed sound pickup applications like conferences, houses of worship, courtrooms and more. It has a wide-range condenser element with low-mass diaphragm, delivering clear, intelligible sound reproduction, as well as flat, smooth frequency response. Its small-diameter double gooseneck design enables highly versatile positioning while maintaining a smooth, well-contoured appearance, and its self-contained electronics eliminate the need for external power modules. This particular model stands 15.79" (401mm) from the table or podium; also available is the longer PRO 47T (sold separately), rising 12.40" (315mm) above the table or podium.

Applications

Boardrooms • Courtrooms • Education • Government • House of worship • Conferences • Other installed applications

Includes

• PRO 47TL gooseneck microphone
• AT8146 windscreen
• AT8425 ⅝"-27 threaded mounting stud

Features

• Wide-range condenser element with low-mass diaphragm
• Self-contained electronics eliminate need for external power modules
• Direct mounts to any ⅝"-27 stand or to included threaded mounting stud
• Quit, fixed-placement, long-life gooseneck
• Flat, smooth frequency response
• Overall length of 15.79"

Specifications

• Elements: Fixed-charge back plate, permanently-polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 70 - 16,000Hz
• Open Circuit Sensitivity: -37dB (14.1mV) re 1V @ 1Pa
• Impedance: 100Ω
• Maximum Input Sound Level: 134dB SPL, 1kHz @ 1% T.H.D.
• Dynamic Range (typical): 106dB, 1kHz @ Max SPL
• Signal-to-Noise Ratio: 66dB, 1kHz @ 1Pa
• Phantom Power Requirements: 9 - 52VDC, 2mA, typical
• Weight: 2.4oz. (67g)
• Dimensions (L x head Dia): 15.79" x 0.47" (401 x 12mm)
• Output Connector: 3-pin XLRM-type on cable
• Cable: 9.8' cable permanently attached between microphone and XLRM-type connector
• Note: further information can be found within the items located under the "Documentation" tab above.