Shure WL183 Omnidirectional Lavalier Microphone With TA4F Connector

Recommended for general purpose sound reinforcement, recording, or remote monitoring applications, the WL183 is an omnidirectional lavalier microphone with a 360° pickup angle and low handling noise. It has a 1.2 meter (4 ft.) cable terminated with a miniature 4-PIN mini connector. Included tie clip can be rotated in 90° intervals for placement flexibility. Features CommShield Technology, which guards against interference from cellular RF devices and digital bodypack transmitters.

Features

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Interchangeable cartridges that provide an optimal choice for each application
• Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
• Supplied snap-fit foam windscreen that controls breath noise and stays on securely
• Balanced, transformerless output for increased immunity to noise over long cable runs
• Supplied dual tie clip holds two microphones for dual miking applications

Specifications

• Type: Condenser (electret bias)
• Frequency Response: 50 to 17,000 Hz
• Output Impedance: 1800 Ω
• Sensitivity: -40.0 dBV/Pa
• Maximum SPL: 125.0 dB SPL
• Self Noise (A-Weighted): 22.5 dB SPL
• Dynamic Range: 102.5 dB
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
• Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter