RDL STTC1

ST-TC1

OUR PART #:  STTC1 Write the First Review.

Our Price: $109.49
List Price: $146.46
You save 25%!
Radio Design Labs' ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU. It is NOT intended to be connected directly to a telephone CO line.
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU. It is NOT intended to be connected directly to a telephone CO line. Connections from the ST-TC1 go into the telephone switching unit as if the ST-TC1 was an incoming phone line.

When the KSU seizes the line to the ST-TC1, a relay contact closure is provided which can be used to control a variety of equipment, such as a paging system or radio system. The closure is maintained as long as the line is seized. A 600 Ohm transformer-isolated audio feed is available for audio to or from the telephone switching unit. The ST-TC1 will pass DTMF audio from a telephone keypad or other DTMF generating device.

The ST-TC1 may be utilized to add paging zones or a radio system interface to a telephone system. When any instrument in the telephone system picks up the line associated with the ST-TC1, the relay closes to activate the radio or paging function, and the audio spoken into the handset is broadcast. The ST-TC1 can not be connected to a phone line that has ringer voltage present.

The ST-TC1 can be used in conjunction with RDL's ST-VOX1 modules to provide two-way communication. The ST-VOX1 will provide the necessary Push-to-Talk funtion to key the two-way comuunications systems.

Specifications:

  • Line Connection: Simulated telco central office line to feed telephone system
  • Audio In/Out Impedance: 600 Ohms balanced
  • Switching Contacts: Double-pole, Double-throw
  • Max. switching power: 60 W, 125 VA
  • Max switching voltage: 220 Vdc, 250 Vac
  • Max. switching current: 2 A
  • Max. carrying current: 3 A
  • Power Requirement: 24 to 33 Vdc @ 50 mA, Ground-Referenced

Note

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL STR19A STR-19A

RDL STR19A STR-19A

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
$141.35 List Price: $189.08You Save 25%
In Stock
Free Shipping AvailableFree Shipping
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
$24.18 List Price: $32.35You Save 25%
In Stock
RDL STRRB1 ST-RRB1

RDL STRRB1 ST-RRB1

Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
$23.44 List Price: $27.65You Save 15%
In Stock
RDL DRA-35S  Din Rail Adaptor for STICK-ON

RDL DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
$20.06 List Price: $23.67You Save 15%
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
RDL STR19B STR-19B

RDL STR19B STR-19B

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
$168.05 List Price: $224.79You Save 25%
Please call for availability.
Free Shipping AvailableFree Shipping
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 6-10 business days.
RDL SR10 SR-10

RDL SR10 SR-10

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
$67.63 List Price: $90.45You Save 25%
Usually ships in 4 business days.
RDL SR12A SR-12A

RDL SR12A SR-12A

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
$67.63 List Price: $90.45You Save 25%
Usually ships in 6-10 business days.
RDL STPBR4 ST-PBR4

RDL STPBR4 ST-PBR4

Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
$35.78 List Price: $47.84You Save 25%
Usually ships in 6-10 business days.
RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
$33.98 List Price: $40.10You Save 15%
Usually ships in 6-10 business days.
RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
$28.96 List Price: $38.73You Save 25%
Usually ships in 6-10 business days.
RDL DTB-RDL Dtb Rdl Detachable Terminal Block

RDL DTB-RDL Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
$7.15 List Price: $8.44You Save 15%
Usually ships in 4 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information