Ashly MX-206 6-Channel 1RU Stereo Microphone Mixer

Six channels of superior audio performance in a rugged, rackmountable unit.

Alone or as part of a larger console, the MX-206 adds additional high-quality mic inputs to any live sound reinforcement, broadcast, recording, or film/video production setup. This rackmountable, stereo unit delivers up to 84dB of gain for distant mic placements or extremely low-level signals. Ultralow-noise, studio-grade, discrete mic preamps are accompanied by a switchable 20dB pad, three-position mic gain switch, input level and pan controls on each channel. 48V phantom power may be switched in for use with condenser mics. The MX-206 also has a Stereo Line In volume control for line level sources connected to the rear-panel RCA inputs or 3.5mm jack on the front panel. With plenty of headroom designed into the MX-206, even the loudest signals can be handled without distortion. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 Ohms, and separate stereo TRS 1/4" outputs may be used either balanced or unbalanced.

Features

• Six high-gain mic preamps (60dB)
• Transformer isolated +24dBm 600 Ohm balanced XLR-mono output
• +48V phantom power
• 20dB input pad switch
• 5-Year Worry-Free Warranty

Specifications

• HD at +20 dBu, 20Hz-20KHz, input switch at -40dB
• IMD (SMPTE) at +20dBu, input switch at -40dB
• HUM & NOISE (20Hz-20KHz , input switch at -60dB)
• Equivalent input hum and noise
• Residual output noise, TRS outputs, all levels at minimum
• Residual output noise, XLR outputs
• Master Level at nominal, all Ch. Level controls at min
• Master Level and one Ch. Level at nom
• Mic Input to Master Output, 600 ohm load
• Aux In to Master Output
• Frequency Response - 20Hz-20Khz +0/-0.5dB
• Crosstalk - between any inputs or outputs 20Hz-20KHz
• VU METERS - Two 6-segment LED meters 0VU = +4dBu
• Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping
• +48 VDC applied to all Mic Inputs, switchable on front panel.
• Maximum total current draw = 80mA.
• Maximum single channel current draw = 14mA.
• Gradual power-up and down to eliminate "pops".
• SHIPPING WEIGHT 13 lbs. Maximum
• POWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 watts
• DIMENSIONS:
• 19" wide x 1.75" high x 8.0" deep.