RDL STMDA3 1x3 Mic Level Distribution Amplifier

OUR PART #: STMDA3 MFR #: STMDA3

Copied to clipboard

RDLs' STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. ...Read more

RDL STMDA3 1x3 Mic Level Distribution Amplifier Image 1
RDL STMDA3 1x3 Mic Level Distribution Amplifier
Our Price: $195.01
List Price: $260.01
You save 25%!

SPECIAL FINANCING AVAILABLE

Synchrony Music & Sound Card
$6/mo* with 36 month financing. ‡
Limited Time. Learn How
Item usually available to ship in 9-12 Business Days. Please call for up-to-date information on product availability.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

RDLs' STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kOhm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A multi-turn trimmer is user adjustable for either gain or loss in order to match the facility standard microphone levels. Three balanced outputs provide nearly total isolation between the output lines. Unlike mic-splitting transformer systems, the STM-DA3 also provides audio isolation. In fact, the audio isolation is so good that a +4 dBu signal fed into one output is still below the noise floor on the adjacent output. Loading of one output, including a direct short, has no effect on the other outputs.

The STM-DA3 is built on the electrical architecture of RDL's low- noise studio quality mic preamplifiers. Dynamic or condenser microphones may be used with the STM-DA3. Standard 24 V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDL's unique Dual-LED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below optimum level. The intensity of the green LED progresses from minimum to full intensity over a 15 dB range. The adjacent red LED illuminates when the operating level exceeds the optimum level. This makes the STM-DA3 easy to set up without any external test equipment, and operating levels may be monitored at the module.

RDL STM-DA3 Features:

  • Feed 1 Microphone to 3 Microphone Inputs
  • Electrical and Audio Isolation
  • Studio Quality Low-Noise, Low-Distortion Performance
  • Excellent Phase Response
  • Versatility of STICK-ON® Compactness

RDL STM-DA3 Specifications:

  • Input: 1200 Ohm balanced
  • Outputs (3): -45 dBu, 150 Ohm balanced
  • Gain Range: 17 dB, 10-turn trimmer adjustable:
    • *Control fully CCW: Gain = -5 dB
    • * Control fully CW: Gain= 12 dB
  • Frequency Response: 30 Hz to 20 kHz (+/- 0.2 dB)
  • THD: < 0.1%
  • IMD: < 0.1%
  • Noise: < 80 dB (below -50 dBu output, -45 dBu input)
  • Headroom: > 20 dB (-50 dBu output, -50 dBu input)
  • CMRR: > 60 dB (100 Hz to 5 kHz)
  • Output Isolation: > 135 dB (balanced audio),> 150 dB (common mode)
  • Power Requirement: 24 - 33 Vdc @ 40 mA, Ground-referenced

Note:

Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download