RDL TXMX2R

TX-MX2R

OUR PART #:  TXMX2R Write the First Review.

Our Price: $85.98
List Price: $115.00
You save 25%!
  • Mix 2 unbalanced mono signals
  • Combine stereo into mono
  • Gain trim for each input
  • Two active isolated outputs from the input signal (s)
Learn More
Price-Matching Symbol. Low Price Guaranteed
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' TX-MX2R is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed either one or two unbalanced destinations.

The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. Each output from the TX-MX2R is a mono mix of the stereo signal. Normally, the gain trimmers are set to unity gain. If either channel is low, the gain of that channel may be adjusted up to 6 dB.

The TX-MX2R may also be used to mix two separate sources into a single output. The mixing circuit in the module is an active summing amplifier.

The output driver provides two separate, identical output signals from the input signal or signals. This output distribution amplifier therefore allows the TX-MX2R to be used as a two-output audio distribution amplifier. If it is desired to distribute a single source to two destinations, one of the inputs may be left unused without any loss of performanc

Features:

  • Mix 2 unbalanced mono signals
  • Combine stereo into mono
  • Gain trim for each input
  • Two active isolated outputs from the input signal (s)
  • Isolation between inputs
  • High-Quality unbalanced audio

Specifications:

  • Inputs (2): -10 dBV
  • Input Impedance: 10 k-ohms
  • Noise: < -75 dB (referenced to -10 dBV)
  • THD+N: < 0.05% (0.01% typical)
  • Frequency Response: 25 Hz to 45 kHz (+/- 0.5 dB); 15 Hz to 70 kHz (+/- 1 dB)
  • Gain (per channel): Unity to +6 dB nominal (adjustable)
  • IMD: 0.01% typical
  • Outputs (2): 100 ohms unbalanced, -10 dBV to drive low or high impedance unbalanced lines
  • Headroom: > 27 dB (24 Vdc supply); > 18 dB (12 Vdc supply)
  • Power Requirement: GROUND-REFERENCED, 12 to 33 Vdc @ 10 mA

Note

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL TXRA5 TX-RA5

RDL TXRA5 TX-RA5

Radio Design Labs' TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
$34.19 List Price: $45.72You Save 25%
In Stock
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
$24.18 List Price: $32.35You Save 25%
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 6-10 business days.
RDL PM-1T Pole Mount Tray for RDL Module

RDL PM-1T Pole Mount Tray for RDL Module

The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ...
$84.76 List Price: $113.36You Save 25%
Usually ships in 6-10 business days.
RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.Radio Design Labs TX-HRA3 Rack Mount Specifications: Package Dimensions (LxWxD): 13" X 2.5" X 2.5" Shipping Weight: 0.55 lbs.
$32.51 List Price: $43.47You Save 25%
Usually ships in 6-10 business days.
RDL TX-RRB1  Rear Rack Rail Mounting Kit for Any TX Series Module

RDL TX-RRB1 Rear Rack Rail Mounting Kit for Any TX Series Module

Radio Design Labs' TX-RRB1 mounting kit contains a bracket to attach a TX module to a rear rack rail or to any flat surface.Shipping Weight: 0.15 lbsPackage Dimensions: 4" x 2" x 2"
$12.27 List Price: $14.48You Save 15%
Usually ships in 6-10 business days.
RDL DRA-35T Din Rail Adaptor for TX Module

RDL DRA-35T Din Rail Adaptor for TX Module

The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
$9.86 List Price: $11.62You Save 15%
Usually ships in 6-10 business days.
RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
$5.29 List Price: $7.07You Save 25%
Usually ships in 6-10 business days.
RDL MB2-RDL Mounting Kit for RU and TX Series

RDL MB2-RDL Mounting Kit for RU and TX Series

MB-2 pair mounts a RACK-UP or TX module above or below a surface.
$2.43 List Price: $2.87You Save 15%
Usually ships in 6-10 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information