Pro Co Product Financing

Pro Co's MDP is a blue dual banana plug. NOTE: Shown above in black, comes in blue.

MasterMike microphone cables provide outstanding low noise performance in a highly durable cable. Featuring our exclusive ArmorFlex outer jacket, this highly flexible cable uses a 2-conductor, 23 gauge wire with a 94% braided shield.

Pro Co's 03-MIC-XX-SQ cable is a 3-foot, 24AWG quad cable with braided shield, custom double outer jacket, and black Neutrik XLR's with gold contacts on both ends. Features: Conductor Gauge: (4)24 gauge Shield: Bare annealed copper braid S ...

MasterMike microphone cables provide outstanding low noise performance in a highly durable cable. Featuring our exclusive ArmorFlex outer jacket, this highly flexible cable uses a 2-conductor, 23 gauge wire with a 94% braided shield.

Insert patch cables allow mixing consoles to send/return signals to an outboard effect processor like a digital reverb. Typically the I/O starts as a TRS 1/4" output jack on the mixing console. Sends go through the tip and returns through ...

The Pro Co 75-SPK14/2-SS is a 75 ft 14AWG speaker cable that is engineered to flawlessly deliver the full range and power provided by your amplifier. Encased in our ArmorFlex outer jacket for durability and tangle-free flexibility, this ca ...

Pro Co's WP1042 is their Plateworks single-gang stainless steel wall plate with 1x Neutrik NC3FDL-1-O "D-Series" non-latching XLR-F connector.

Pro Co's DA88XF-10 is a 10 ft. DB25 multipin to 8x XLR-F analog D-sub studio patch snake. Originally designed to connect Tascam DA88 digital audio tape recorders to the various mixing consoles available, these work with Mackie, Tascam and ...

Pro Co's DA88XM-5 is a 5 ft. DB25 multipin to 8x XLR-M analog D-sub studio patch cable, Originally designed to connect Tascam DA88 digital audio tape recorders to the various mixing consoles available, these work with Mackie, Tascam and Pr ...

Since 1982, Excellines have been Pro Co's standard guitar cables. Using ShowSavers standard 1/4" connectors and 23rd generation Pro Co 120S1 wire, and the blue "widget" strain relief under each connector (the cable’s trademark), Excellin ...

The Pro Co Monoface MC-2 Mic Combiner passively combines the signals from two low-impedance microphone (or similar sources) into a single output. It is a handy "band-aid" for situations where the number of microphones required exceeds the ...

Pro Co's WP2011 is their Plateworks dual-gang stainless steel wall plate with 4x XLR-F connectors.

Pro Co's 224S Armorflex jacketed 2-conductor cable with spiral shield with a ShowSavers TRS plug on one end and a Neutrik XLR female on the other.

Pro Co's MT8BQXF-10 is a 10ft, 8-channel studio patch snake with one fan of 8 x 1/4" TRS connectors on one end, and one fan of 8 x Neutrik 3-pin females on the other end. Features: Acculink ArmorFlex jacketed multipair wire Clearly numbere ...

Pro Co's MT8QR-20 is a 20 ft., 8-channel studio patch snake with one fan of 8x 1/4" TS phone plugs on one end and one fan of 8x RCA plugs on the other end. Features: Acculink ArmorFlex jacketed multipair wire Clearly numbered pairs for eas ...

Pro Co's WPU3001 is their Plateworks triple-gang stainless steel wall plate with 3x "D-Series" punch outs.

Using Pro Co 224SM miniature mic cable with spiral shield assembled to a ShowSavers TT plug on one end and a Neutrik XLR female on the other. Most professional recording studios use TT T/R/S patchbays because they offer 96 patch points in ...

Pro Co's PRR Excellines unbalanced patch cable connects unbalanced consumer and pro audio gear such as keyboards, recording or playback devices. Built with Pro Co 120SM wire, G&H BF2P and Pro Co 3502HD plugs.

Dual patch cables were designed to connect today's stereo keyboard outputs to mixers for stage and recording use. They are constructed of two single conductor cables “twinned” together for ease of use and transportation. Pro Co 2120SM ...

Re-engineered from the stagebox to the connectors for even greater reliability, Proco's StageMaster multipair cables are an ideal choice for church groups, fixed installations, schools and one-nighter portables. The rugged design features ...

Re-engineered from the stagebox to the connectors for even greater reliability, Proco's StageMaster multipair cables are an ideal choice for church groups, fixed installations, schools and one-nighter portables. The rugged design features ...

Dual patch cables were designed to connect today's stereo keyboard outputs to mixers for stage and recording use. They are constructed of two single conductor cables "twinned" together for ease of use and transportation. Pro Co 2120SM 2-co ...

Dual patch cables were designed to connect today's stereo keyboard outputs to mixers for stage and recording use. They are constructed of two single conductor cables “twinned” together for ease of use and transportation. Pro Co 2120SM ...

A type of "Y" cord, insert patch cables allow mixing consoles to send/return signals to an outboard effect processor, say a digital reverb. Typically the I/O (inputs/outputs) start as a T/R/S 1/4" output jack on the mixing console. Sends t ...