Drum Hardware

Pearl Drums' PS-85 pedal stabilizer prevents bass drum pedals from creeping forward as you play them. The PS-85 can be used on the secondary pedal portion (the side not directly connected to the bass drum itself) of a double bass drum peda ...

The DW DWSM912L is a 1/2" by 22" Boom Cymbal Arm with memory lock. Fits into boom tilter, DogBone® or Mega Clamp eye bolt.

The Gibralter SC-EA100 is an extension tube with clamp

Gibraltar’s Turning Point Short Cymbal Hideaway Boom Arm with brake tilter is a great way to add cymbals to your set up without adding another cymbal stand tripod to your set up. This boom arm can be clamped on to any cymbal stand or rac ...

Yamaha's double tom stands have long been recognized for their outstanding freedom in positioning drums. Their simple and druable design offers stable setting while the ball clamp system's ability to rotate an angle of 360 degrees lets you ...

The 9303 has a contoured basket to accommodate smaller 10” to 12” snare drums. Made to securely cradle 10 and 12” snare drums. The 9300 Series Snare Stands are the only stands designed with double pedal set-ups in mind. The offset ba ...

The DW Drums DWSM9212 is a 1/2" by 18" Boom Arm Closed Hi-Hat to mount off of stand or to replace boom arm in cymbal stand. Includes MG-3.

The Yamaha CL-940BW is a tom drum ball clamp with long hex rod and short pipe.

The Yamaha CL-940LBW is a tom drum ball clamp with long hex rod and extended base.

Tom drum ball clamp with extended base.

The Yamaha CSAT-924AW parallel multiclamp connects to the pipes of stands and holders, allowing a wide variety of setups and positions to be easily achieved.

DW's versatile 9701 straight/boom cymbal stand has drummer-friendly features like toothless tilter with Techlock, adjustable cymbal seat, integrated memory locks and heavy-gauge tubing make these stands road worthy and reliable beyond comp ...

The DW DWSM776 dogbone accessory clamp features double angle adjustable 'V' clamps and SMMGM memory locks, with a total length of 7".

The DW Drums DWSMMG-5 is a SMMG3 with SMTA105, SMMGM and SM783 memory locks.

These patented cymbal holders mount on any cymbal stand. The free movement of the Cymbal Spring™ helps to absorb impact to protect the edge and center hole of the cymbal. The medium spring, which is red, is recommended for crash cymbals ...

Pearl Drums' PCL-100 is a Pipe Leg Clamp that fits onto their ICON Series drum rack leg posts, with an accessory hole that fits 7/8" diameter tubes, and is for attaching cymbal boom arms, rack tom arms, and straight cymbal holders.

DW reengineered the pedal that established its reputation for innovation and quality. Because innovation is part of DW's DNA they thought it was time for some major improvements. Most notably, the toe clamp. The 5000 needed more gripping s ...

The basic HEXRACKII set consists of two legs and is fully compatible with Yamaha System Hardware. Compared to a typical hardware setup, the HEXRACKII uses less space and reduces floor clutter produced by stand legs, etc., around the kit. T ...

The Yamaha HEXRACKII HXR2LCHII is a 2-leg configuration with a hexagonal curved pipe. This basic HEXRACKII set is fully compatible with Yamaha System Hardware. Yamaha HXR2LCHII Includes: 1x HXCP44II curved pipe 2x CH-755 boom arms 2x HXTL3 ...

T-shaped leg for HexRackII (clamp and pipes are made from aluminum). Vertical pipe length: 30 inches (approx. 76cm).

The Yamaha HXCP44II is a 44" long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy, creates pipes that are significantly lighter in weight while providing greatly impr ...

This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. HEXRACKII clamps get a rock solid grip on the rails ...

Your drum mounting hardware has to do two things really well, hold up your drums and put them exactly where you want them. Enter the 9000 line of tom stands. Made from heavy gauge tubing with oversized tube joints to minimize wobble, and a ...

The DW 9702 Dual Cymbal Multi-Stand is yet another innovation designed to give drummers almost limitless set-up options. The versatile stand features dual ratchet boom with X-Pand™ quick release, mega-tripod base, heavy duty 1.25” tubi ...