Microphones, DI, Pickups

Connecting cable from PS to SR. The cable for connecting antenna power splitters with receivers shall be an RG 58 cable (50 Ohms), Specifications: Length: 0.6 m Gold plated BNC connectors on both ends

The DMM0002-B from DPA Microphones is a durable but flexible clothing mount for attaching miniature microphones to performers and speakers. The unique dual pin structure simplifies and stabilizes the mount and your mics to clothing of any ...

NOTE: Available in satin nickel and black matte finishes. Comes with wood case. Microtech Gefell's MT71S is a cardioid-pattern FET microphone that features their M7 dual-membrane, gold evaporated capsule. The MT71S also included a low-nois ...

NOTE: Available in satin nickel and dark bronze finishes. Microtech Gefell's M940 is a compact, large diaphragm hypercardioid microphone that combines the latest Gefell M9 gold evaporated capsule with an optically isolated capsule amplifie ...

NOTE: Shown above in XY orientation and satin nickel finish. Also shown above and available in dark bronze finish. Microtech Gefell's XY large diaphragm stereo sets are simple, elegant and extremely effective tools for the discerning recor ...

NOTE: Shown above in ORTF orientation with dark bronze finish. Also shown above and available in satin nickel finish. Microtech Gefell's M930 ORTF large diaphragm stereo sets are simple, elegant and extremely effective tools for the discer ...

Microtech Gefell's M296S is a precision omnidirectional microphone that features a pure nickel diaphragm for accurate response throughout the audio bandwidth. A ceramic housing ensures temperature-stable performance and assures a uniform s ...

Microtech Gefell's KEM970 is a cardioid plane microphone that features a series of 8 precision-controlled capsules in a line array configuration. This allows signal steering of source material whereby a natural supercardioid pattern is ach ...

Microtech Gefell's MF97 is a metal base for their KEM 970 microphone (180 mm).

The CSM4000 Compact Microphone Shock Mount by DPA Microphones is designed for even the most rigorous use of compact microphones when attached to standard mic stands, the TB4000 Table Base or the MB4000 Magnet Base. This industry-tested mic ...

The Nose Cone UA0777 is specially designed for use with the Standard Microphone Type 4003 and 4006, the A-B Stereo Kits 3503 and 3506 and the Compact Microphones Types 4051, 4052 and 4053. It will give your microphone a perfect omnidirecti ...

The CXO4000 Stereo Mic Mount for Pencil Microphones from DPA Microphones is ideal for capturing high-quality stereo audio both live and in studio. Its compact design makes this mount perfect for staging miniature DPA microphones in coincid ...

Microtech Gefell's SH93S is a stereo XY mounting bar for use with their M930 and M940 microphones.

High-performance antenna booster for inserting into long antenna cables. One AB 4000 can compensate for approx. 17 dB of cable attenuation, allowing RG 213 cable runs to be extended by approx. 60 m (200 feet). Up to three AB 4000 boosters ...

DMM0011-B is a very strong magnet holder that can hold up to two Miniature Microphones by their cables or one by the housing. The holder is suited for everything magnetic, such as grand and up-right piano (in the frame) or drums with magne ...

Miniature Mesh for use with 4071, to reduce slight wind- or pop noise from a speaker's voice or any other turbulence that can cause the diaphragm to disperse. The Miniature Mesh will give a high frequency boost that is strongest on axis. F ...

The UA0961 Microphone Holder is of a unique design, which ensures, that the microphone is held securely at all times. It is best suited for use in permanent or semi-permanent set-ups, where the stability of the microphone is of optimum imp ...

The UA0836 is a precision-crafted microphone boom for secure mounting of microphone pairs for A-B stereo recordings. It has adjustment possibilities for both microphone spacing and microphone angle. The boom can be mounted on a stand, or s ...

The UA0897 Shock Mount is designed for use in environments where vibration levels are unusually high. It's ultra-compact, robust design significantly reduces the amount of vibration, that reaches the microphone without having adverse acous ...

The DAD6033 MicroDot to 4-Pin Hirose Adapter from DPA Microphones is designed for use with DPA miniature headset, lavalier, and instrument microphones. This convenient adapter helps you easily reconfigure select Audio-Technica wireless set ...

The AKG CU 400 is a dual-bay battery charger that allows a user to place both the AKG HT 400 handheld transmitter and PT 400 bodypack transmitter directly into the unit for quick, safe charging without having to remove the battery. Include ...

The DAD6021 MicroDot to TA5F Adapter from DPA Microphones is designed for use with DPA miniature headset, lavalier, and instrument microphones. This convenient adapter helps you easily reconfigure your Lectrosonics UHF or ATW-T101 wireless ...

An essential feature of the installation hardware described below is the attenuation of structure-borne noise that prevents the transmission of unwanted noise (footfall etc.). The amount of attenuation is determined by the material mix of ...

Microtech Gefell's MH93.1S is a microphone holder for their M 930, M 940, M 950, M 960 microphones.