Truss, Rigging & Staging

The MTP30MH from The Light Source is a 30" Mega-Truss Pick that is a multi-hole unit designed to handle 1 ton and comes with an aluminum finish. Measuring at 1" x 6" x 31-3/8" 6061 T-6 billet and machined with pockets to support one piece ...

The Light Source's MTD12/2-20.5/1 ML-IS Mega-Truss Dolly is designed to easily "cradle" (2) 12" or (1) 20.5" truss segments for transport or storage. The 5" aluminum C channel features CNC milled cutouts for truss to ride in, plus this ver ...

This Mega-Coupler, from The Light Source, replaces the typical Hex Head bolt with a flat head countersunk bolt. Equipped with a 3/8" flat head base to fit a flat head bolt, an Allen wrench is required to adjust it. Note NOTE: See Attached ...

The Mega-Truss Dolly E-Strap from The Light Source is manufactured by SpanSet. Intended for use with TLC's Mega-Truss Dollies, the E-Strap is grey, 16 feet long, and has a working load limit of 1,000 lbs.

The Mega-Truss Dolly from the LIght Source easily holds truss for transport or storage. This model, the MTD20.5/2-12/3 is designed for (2) 20.5" or (3) 12" Truss (41" Long) and it comes in the color of Silver. The 5" aluminum C channel has ...

The Light Source MTDTSGLOBAL11.4375/2 Truss Stackers protect your truss finish and keep truss neatly stacked. Placed between the rows of truss, the Truss Stackers separate the truss with CNC-machined pockets to hold the truss in place. Mad ...

The Light Sources' UTP Silver Universal Truss Pick adjusts to all standard 2" tube cord truss from just one tube out to both cords of pre-rig truss. Keep a Universal Truss Pick with each chain motor and always have a metal to metal rigging ...

This jaw set from The Light Source is for beam flanges is intended for fastening the Mega-Beam Clamp on up to 2" thick beam flanges. This model is composed of CNC milled from 6061T-6 aluminum billet. The MBC2INCHJAWS can be field exchanged ...

The Light Source's CPC-AB-MCMB Chandelier Chain Mount is CNC machined from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Chandelier Chain Mount and the hollow chain link pins to secure ...

The Light Source MTD12/2-20.5/1ML-OS Mega-Truss Dolly easily holds truss for transport or storage. The 5 inch aluminum C channel has CNC milled cutouts for truss to ride in. It is important to secure the trusses tightly to the Mega-Truss D ...

The Light Source's Swivel Mega-Coupler fastens to pipes or tubes ranging from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel Coupler has wide wing nuts for fastening the clamp to the pipe or tube, and can be locked into a 90º ...

The Light Source's M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges. Fully compatible with the H&H 300 and ADC 140 style tracks, this 20-foot silver track should be supported every 4-5 feet. A complete system o ...

The M-140 Master Carrier from The Light Source is self guiding with its flanged wheel design. The four rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel axle is machined to a 30 micr ...

The Light Source's M-140 Track Stop consists of two CNC machined 1/4" x 1" aluminum flat bars with contours that match the curvature of the M-140 Curtain Carrier (sold separately), so as not to "ding" the carrier wheel. The rear bar is thr ...

The Light Source's M-140 Track Splice is made of two 1/4" x 1" x 3-1/2" aluminum bars designed to fit into the upper "I" of the walk along style tracks. The rear splice bar is drilled and tapped at the factory, so no nuts or wrenches are r ...

The M-140 Carrier from The Light Source is self guiding with its flanged wheel design. The rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel axle is machined to a 30 micron finish fo ...

The Mega Folding Floor Stand from The Light Source is a compact folding stand for placing light fixtures on a stage floor. It folds out into a stable 15" light base, and folds up into a 6" square for storage and to fit into corners, tight ...

The CPC Coupler Mount (part no. CPC-CPA) from The Light Source fastens to the main body of a Chain Pole Clamp (sold separately) with two 1/2"-13 flathead socket screws. A Mega Coupler 1/2CS (sold separately) is then fastened to the aluminu ...

The Light Source's SF.5-13X2.00-APL is a 2" flat head bolt made for the Countersunk Mega-Coupler. The Light Source SF.5-13X2.00-APL Includes: Flat head bolt The Light Source SF.5-13X2.00-APL Features: Made for Countersunk Mega-Coupler The ...

The Light Source's 8" Mega-Tent Beam Clamp opens 5-1/4" to fasten securely into the Keder track slot in free span tent beams. The clamp engages the Keder track slot on both sides for 8", has a centered hole for a 5/8" shackle, and has two ...

The Light Source MVM Mega-Swivel C-Clamp is a pan-locking bolt-style theatrical C-Clamp. The light fixture is bolted to, and rotates on a retained steel post in the clamp's body. Comes with 1/2" fasteners. Specifications Minimum Size: 1" p ...

The Light Source MSCM Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of the standard Mega-Coupler and weighs 30% less; yet fits the same as the Mega-Coupler. The Mega Slim will fasten from 1-1/4 ...

From The Light Source, MTP24MH ia a 1" x 6″ × 25-3/8" 6061T-6 Aluminum CNC machined with pockets to support one piece of 24" truss. For operation, the truss is secured by two aluminum pivoting links, half inch swivel bolts, and our soli ...

The Light Source's M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges. Fully compatible with the H&H 300 and ADC 140 style tracks, this black anodized track should be supported every 4-5 feet. A complete system o ...