Grip Equipment

The Manfrotto 244 features as a 143A, but a large locking knob takes the place of the cam-lever. Variable friction and locking of arm obtained by adjusting knob. Comes complete with Camera/Umbrella Bracket 143BKT only. Specifications: Arm ...

Heavy duty wrap around low profile hook style clamp. Global Truss Quick Rig Clamp Specifications: Unit Weight - 1 lbs. TUV Approved

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 10" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 10" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Purlin Clamp is perfect for installing to purlins, I-beams and bar joists up to 1" thick. 1/2" x 2.5" square head set screw for locking onto I-beam. 1/2" x 1" grade 5 Hex Head Bolt supplied to connect load or use for1/2" – 13 tpi thr ...

Standard Mega-Coupler # MLM with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. The Light Source MLMBP Specifications: Minimum Size: 1.25" Pipe. 1.66" OD Pipe Maximum Size: 1.5" Pipe, 1.90" OD Pipe, 2" OD Truss Tube ...

The Light Source's MOB4 4" Monstro-Clamp fastens to those really big 2-3/8"-4" OD pipes. CNC cut from solid 1" thick aluminum plate. The Light Source MOB4 Monstro-Clamp Specifications: Minimum Size: 2" pipe, 2.375" OD Maximum Size: 3.5" pi ...

The Light Source offers the ML-SBA-B which is a 1 1/4" Hex Head Bolt with the Light Source's wing nut and a 1" Belleville washer that comes in anodized black. This Mega-Coupler Bolt Assembly consists of the appropriate bolt, nut and Bellev ...

The Light Source MWTB Trapezoid Head Bolt for the Mega-Claw is manufactured from aluminum, and comes in Black Anodized finish.

The Light Source MW-M-HB bolt handle for the Mega-Claw is manufactured from aluminum, and comes in Black Anodized finish.

The Global Truss Mini 360 QR Swivel is a light-duty quick-release clamp designed for 50mm tubing, and is compatible with F31, F32, F33, and F34 Truss. Global Truss Mini 360 QR Specifications: Minimum Tubing Diameter: 48mm Maximum Tubing Di ...

The Light Source's Purlin Clamp [model PCB3/8] is perfect for installing to purlins, I-beams and bar joists up to 1" thick. 3/8" × 2.5" square head set screw for locking onto I-beam. 1/2" × 1" grade 5 Hex Head Bolt supplied to connect lo ...

The ST-824 is an accessory clamp from Global Truss that is a medium duty clamp with reversed elbow and half coupler for 50mm tubing. This clamp is compatible with F31-F32-F33-F34-F44P Truss units. Global Truss ST-824 Specifications: Minimu ...

The MUM Mini-Coupler from The Light Source is 1" wide and fits from 1.65" OD to 2" OD Tube. It uses a 3/8" × 3/4" long Grade 5 bolt with a Belleville washer and a Nyloc nut. The Mini-Coupler has a safe working load of 330 Pounds (150 Kg). ...

This Mega-Coupler from The Light Source known as MLM-12CS replaces the standard Hex Head bolt with a flat head countersunk bolt. It comes available with a 1/2" flat head base or a 3/8" flat head base to fit a flat head bolt. An Allen wrenc ...

Lightweight profile for hanging small lighting fixtures to truss or pipes. Holds the weight of the fixture for you while you secure it. No set screw to ding truss. Fits from (1-1/4" pipe) 1.66" OD to 2" OD truss tube. The Mini-Claw is a li ...

Standard, pre-engineered channel style beam clamps anchor to a building’s beam structure to provide a safe and predictable method of rigging grids, clusters, arrays and other objects. The Gimbaled Style beam clamp is unique in that it of ...

MLB1/2CS-NN - Countersunk Mega-Coupler The Light Source's MLB1/2CS-NN is made to replace the standard hex head bolt with a flat head bolt. The Light Source MLB1/2CS-NN Includes: Mega-Coupler Flat head bolt Nylock Nut Belleville Washer The ...

Global Truss' Jr Coupler Clamp Pro is a medium duty aluminum wrap around clamp with a half coupler for 35mm tubing with a maximum weight of 220 lbs.

The Light Source TCB-BC Barco Projector Clamp will fasten from 2" OD to 1.5" OD Tube. Has a 2-1/2" T-Handle so no tools are required to fasten to the pipe. Over 2" of adjustment is possible with the half turnbuckle design. .390" hole for s ...

Standard, pre-engineered channel style beam clamps anchor to a building’s beam structure to provide a safe and predictable method of rigging grids, clusters, arrays and other objects. The BC7-12-GE Gimbaled Style beam clamp from Allen Pr ...

The Light Source's MLB3/8CS Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. This black Mega-Coupler has a 3/8" countersunk flat head bolt.