Grip Equipment

The standard Mega-Coupler # MLM. Has a 1/2" x 1 1/4" Hex Head Bolt with the Light Source Wing Nut. The Mega-Coupler has solid nut tabs that won’t break off. Mega-Coupler uses standard half inch by 1-1/4" long hex head grade 8 bolts to se ...

The Slim-Claw will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1 x 1/2 -13 TPI Grade 5 fastener and 1 diameter Belleville Spr ...

The Light Source MLM1/2CS is a Standard Mega-Coupler with a CS base. Countersunk to hold a 1/2" flat head socket bolt. Comes with a 1/2" x 1-1/2" flat head socket bolt. The Light Source MLM1/2CS Specifications: Minimum Size: 1/4" pipe, 1.6 ...

The Light Source MAW Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum, so it’s both stronger and lighter than cast iron clamps. The Mega- ...

The Light Source's MLSM Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or tube. The Swivel Coupler can be locked into a 90 degree f ...

The Mega-Slim Coupler offers a sleeker profile tailored for smaller light fixtures. Despite being half the size and 30% lighter, it maintains compatibility identical to the standard Mega-Coupler. Designed to secure from 1-1/4" pipe (1.66 O ...

The Quad Coupler 1.5 from The Light Source clamps from 1.25" OD to 1.5" OD tubing, as well as 1" pipe (1.315" OD.). The notch on the outside of the clamp is 1.26" across the flats and will fit over 1-1/4" square tube, while locking the cla ...

Mounts smaller 5/8" socket motion picture stand style fixtures on studio grid pipe. Solid design that won’t rock. Handle is included for attaching to grid pipe. Fits up to 2" OD tube. The Light Source MNBB Specifications: Minimum Size: 1 ...

The Light Source MAB2 Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both stronger and lighter than cast iron clamps. The Mega ...

The Mega-Baby is designed to allow location style lighting fixtures, (lighting fixtures that normally mount to a 5/8" pin on a floor stand), to be hung from the studio grid. The fixture is mounted onto the Mega-Baby’s chrome plated 5/8? ...

The Light Source's Monstro-Couplers are designed to fit pipes larger than the standard theatrical battens. CNC machined from solid billet aircraft-grade aluminum, they are perfect for attaching to odd size pipes and tubes. Monstro-Couplers ...

The Countersunk Mega-Coupler replaces the standard hex head bolt with a flat head bolt. The Countersunk Mega-Coupler comes with a 1/2" or 3/8" flat head base and comes standard with a heavy duty wing nut developed by The Light Source. Othe ...

The Light Source's MNB Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to the pipe for real gripping power. The Mini-Cla ...

Standard Mega-Coupler # MLM with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. The Light Source MLBBP Specifications: Minimum Size: 1.25" Pipe. 1.66" OD Pipe Maximum Size: 1.5" Pipe, 1.90" OD Pipe, 2" OD Truss Tube ...

The Light Source MVB Mega-Swivel C-Clamp is a pan-locking bolt-style theatrical C-Clamp. The light fixture is bolted to, and rotates on a retained steel post in the clamp's body. Comes with 1/2" fasteners. The Light Source Mega-Swivel C-Cl ...

The Light Source's MWW Mega-Claw is the new standard for hanging intelligent lighting fixtures. The Mega-Claw allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds the weigh ...

The Light Source TCM will fasten from 2" OD to 1.5" OD tube. The TCM has a 2.5" T-handle so no tools are required to fasten to the pipe. 1.25" x 0.5"-I3 TPI Grade 8 fastener, Nylock Nut and 1" diameter Belleville Spring washer are provided ...

The Light Source PCM1/2 Purlin Clamp is perfect for installing to purlins, I-beams and bar joists up to 1" thick. 1/2" x 2.5" square head set screw for locking onto I-beam. 1/2" x 1" grade 5 Hex Head Bolt supplied to connect load or use fo ...

The Light Source's MNBTV Mini-Clamp is perfect for PAR 38’s, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to the pipe for real gripping power. The Mini-C ...

The SQC2B 2" Square Half Coupler from The Light Source is notched to bolt onto 2" square tubing. This black anodized coupler fastens with standard 1/2" bolts. The Light Source SQC2B Specifications: Finish: Black anodized Minimum Size: 2" s ...

The Light Source offers the MAB3/8 Mega Clamp with 3/8-16 Bottom Bolt, Black Anodized. The Mega-Clamp is the world’s new standard theatrical lighting C-clamp. Created from high tensile, aircraft grade, extruded aluminum; so it’s both s ...

The Light Source MBATM is a silver Mega-Batten Clamp. Light Source MBATM Specifications: Minimum Size: 1.5" Pipe, 1.9" OD Pipe Maximum Size: 2" OD Pipe Safe Vertical Working Load: 1250 pounds Hardware: 1"x 5/16" socket head cap bolt 5/16" ...

The Light Source Inc. offers the MLM3/8 Mega-Coupler, which has solid wing nut tabs that are stronger than regular steel wing nuts. The grade 8 hex head bolt locks securely into the hex milled pocket so that the nylon nut can be tightened ...

The Light Source's MSCM-1/2CS Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of our standard Mega-Coupler and weighs 30% less; yet fits the same as the Mega-Coupler. The Mega Slim will fasten fr ...