Truss, Rigging & Staging

A 1" wide pipe strap, suitable for 1-1/2" diameter pipes. The Light Source MPSB Specifications: Working Load Limit: 500 Lbs. Weight: .11 Lbs.

The Mega-Drop Down from The Light Source is a quick and inexpensive way to place a light fixture below the pipe or grid. It features wrench flats for easy adjustments and is made from solid 3/4" diameter 6061 T-6 aircraft-grade aluminum. T ...

The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum; so it’s both stronger and lighter than cast iron clamps. The Mega-Clamp’s safety ...

Easy hanging of 140 or 300 series track from pipe grids or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track 3/16 of an inch below the pipe grid. Mega-Track Hangers us a Mega-Gri ...

Set of Hardware for Mega-Coupler with 1/2" Flat Head Bolt 12 Each: Nylock Nut Belleville Washer 1.5" Long Bolt

A 1" wide pipe strap, suitable for 1-1/2" diameter pipes. The Light Source MPSW Specifications: Working Load Limit: 500 Lbs. Weight: .11 Lbs.

Designed to fit a variety of airwall tracks. The Mega-Airwall Hanger 7" is 750 pound load rated and will fit a wide variety of airwall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the hanger giving a total o ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Purlin Clamp is perfect for installing to purlins, I-beams and bar joists up to 1" thick. 1/2" x 2.5" square head set screw for locking onto I-beam. 1/2" x 1" grade 5 Hex Head Bolt supplied to connect load or use for1/2" – 13 tpi thr ...

Standard Mega-Coupler # MLM with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. The Light Source MLBBP Specifications: Minimum Size: 1.25" Pipe. 1.66" OD Pipe Maximum Size: 1.5" Pipe, 1.90" OD Pipe, 2" OD Truss Tube ...

Standard Mega-Coupler # MLM with a 5/8" Baby Pin attached. Baby Pin is 3" in length with 1/2" threads. The Light Source MLMBP Specifications: Minimum Size: 1.25" Pipe. 1.66" OD Pipe Maximum Size: 1.5" Pipe, 1.90" OD Pipe, 2" OD Truss Tube ...

The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1" Schedule 80 pipe. The Light Source MSAB12 Specifications: Safe Vertical Working Load: 150 lbs @ 24" Length Weight: 1.7 lbs

Fits Global, Prolyte, Milos, Etc. trussing with 11-7/16" truss cord. This Mega-Truss Pick is notched to fit under the diagonal bracing of this European style of truss. The Mega-Truss Pick is stronger than your truss. Always follow your tru ...

The Mega-Truss Pick is CNC machined from solid 1? × 6? 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel bolts, and our solid wing nuts to completely wrap aroun ...

The Mega-Truss Pick is CNC machined from solid 1" x 6" 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel bolts, and our solid wing nuts to completely wrap around ...

The Light Source's MOB4 4" Monstro-Clamp fastens to those really big 2-3/8"-4" OD pipes. CNC cut from solid 1" thick aluminum plate. The Light Source MOB4 Monstro-Clamp Specifications: Minimum Size: 2" pipe, 2.375" OD Maximum Size: 3.5" pi ...

The Light Source's GFA Genie Fork Adapter is supplied with a 1/2" x 1" Grade 5 bolt and Belleville spring washer to fasten the load to the adapter. An additional 1/2" bolt locks the adapter to the Genie fork. The adapter also fits a Sumner ...

The Light Source offers the ML-SBA-B which is a 1 1/4" Hex Head Bolt with the Light Source's wing nut and a 1" Belleville washer that comes in anodized black. This Mega-Coupler Bolt Assembly consists of the appropriate bolt, nut and Bellev ...

The Light Source MWTB Trapezoid Head Bolt for the Mega-Claw is manufactured from aluminum, and comes in Black Anodized finish.

The Light Source MW-M-HB bolt handle for the Mega-Claw is manufactured from aluminum, and comes in Black Anodized finish.

The Light Source's Purlin Clamp [model PCB3/8] is perfect for installing to purlins, I-beams and bar joists up to 1" thick. 3/8" × 2.5" square head set screw for locking onto I-beam. 1/2" × 1" grade 5 Hex Head Bolt supplied to connect lo ...

From The Light Source comes the MSASB - which is a Mega-Sidearm Slider that comes in black. A Mega-Sidearm Slider can be purchased separately to fasten directly to the Mega-Sidearm. The slider is a 1"×2"×3" aluminum block, CNC machined t ...

The MUM Mini-Coupler from The Light Source is 1" wide and fits from 1.65" OD to 2" OD Tube. It uses a 3/8" × 3/4" long Grade 5 bolt with a Belleville washer and a Nyloc nut. The Mini-Coupler has a safe working load of 330 Pounds (150 Kg). ...