Truss, Rigging & Staging

The model SLCB is The Lighting Source's Slim-Claw, in black anodized, that will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1 ...

The new standard for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds the weight of the fixture for you while you secure it with ...

The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or tube. The Swivel Coupler can be locked into a 90º fixed coupler by adding an ...

The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum, so it’s both stronger and lighter than cast iron clamps. The Mega-Clamp’s safety ...

The standard Black Mega-Coupler # MLB. Has a 1/2" x 1 1/4" Hex Head Bolt with the Light Source Wing Nut. The Mega-Coupler has solid nut tabs that won’t break off. Mega-Coupler uses standard 0.5" by 1-1/4" long hex head grade 8 bolts to s ...

The Light Source Mega-Coupler with Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2" flathead socket screw with permanent loctite. The Eye ...

The Light Source's ML9B Mega-Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Mega-Coupler has the wide wing nuts for fastening the clamp to the pipe or tube. The Light Source ML9B Specifications: Minimum Size: ...

The Light Source's MBATB Mega-Batten Clamp is a Black Anodized clamp for use with your track and pipe grid lighting rig. It uses the same hardware and wrench as the rest of the grid system. 1/2" hole in top for shackles. The Lighting Sourc ...

The Light Source SCB is a black safety cable that is 30 inches in length and made from 1/8" aircraft cable with a 5/16" grommeted snap hook. The Light Source SCB Specifications: Working Load Limit: 200 Pounds Length: 30" Weight: 0.25 Color ...

The Light Source's Mega Slim Coupler is a lower-profile option for smaller light fixtures. It is half the size of their standard Mega-Coupler and weighs 30% less yet fits the same as the Mega-Coupler. The Mega Slim will fasten from 1-1/4" ...

The Light Source TC Clamp is a mounting clamp that fastens on 2" OD to 1.5" OD tubes. This black anodized clamp has a 2.5" T-handle so no tools are required to fasten to the pipe. Includes a 1.25" x 0.5"-13 TPI Grade 8 fastener, Nylock Nut ...

The Light Source's CPC Light Chain Mount Bracket is CNC machined and formed from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Light Chain Mount and the hollow chain link pins to secure ...

The Light Source's UB2B2 is designed to fasten pipes and fixtures to strut channels. Simply insert the Uni-Bolt into the strut channel, rotate 90° and spin the knurled disk to lock it. The Light Source UB2B2 Includes: Uni-Bolt The Light S ...

The Mega-Truss Pick is CNC machined from solid 1" x 6" 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel bolts, and our solid wing nuts to completely wrap around ...

The Light Source MSCB-M12CS Mega Slim Coupler is a lower profile option for smaller light fixtures. It is half the size of the standard Mega-Coupler and weighs 30% less; yet fits the same as the Mega-Coupler. The Mega Slim will fasten from ...

The Mega-Truss Pick is CNC machined from solid 1" x 6" 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel bolts, and our solid wing nuts to completely wrap around ...

The Light Source's Black Anodized Versi-Clamp is a lighting hardware clamp designed to wrap around the entire range of standard truss, from 2" OD down to 1" OD, all without marring the truss. The unique 2-position latch on the link saves t ...

The Light Source MBAT-TRH.500B Threaded Rod Hanger for the Mega-Batten Clamp is a 1" by 1.25" by 3" tall machined aircraft grade aluminum body with a 0.5" by 0.75" socket shoulder bolt to connect to the Mega-Batten Clamp. The design load i ...

The Mega Slim Coupler from The Light Source, is a lower profile option for smaller light fixtures. It's half the size of the standard Mega-Coupler, and weighs 30% less; yet fits the same as the Mega-Coupler. This particular model is the MS ...

Designed for permanent pipe grid installations in studios and theaters, The Light Source's MGB Mega-Gridlock joins 2 overlapping pipes together in a 90° joint. Grooves act as a wrench holding the nut from turning while installing. It inst ...

The Light Source MBAT-TRH.375B Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system and has a 1/2" hole in the top for shackles. The Light Source MBAT-TRH.375B Specifications: Minimum Size: 1.5" Pipe, 1.9" OD ...

The Light Source offers the MFBATB - a Mega-Folding Batten Clamp that comes in Black Anodized aluminum. This one-piece batten clamp is the fastest way to hang 1-1/2" pipe and with its low profile on the bottom end of the batten makes it ea ...

The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 10" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded ...

The Light Source MLB1/2CS Black Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. Equipped with a 1/2" flat head base to fit a flat head bolt. An Allen wrench is required to adjust this bolt. Also availabl ...