Wall Plates, Floor Boxes & Enclosures

Liberty AV's DL-HDCAT-WP-S is a Digitalinx™ twin Category cable HDMI 1.4 wall plate transmitter. This Digitalinx Digital Media Converter is an externally powered digital HDMI and DVI Media Converter system to send HDMI and DVI over stand ...

HDMI Wall Plate Insert Front Panel Connections - HDMI (F). Rear Panel Connections - HDMI cable (F). Size - Single slot wall plate insert.

The ETC ECPB DMXIN/OUT is a 2 Gang DMX input and output wallplate designed for use with the RACO 691 (or equivalent) ECPB station back box (sold separately). ETC ECPB DMXIN/OUT Features: Faceplates are .80” aluminum Finished in fine text ...

Pro Co's WP1050 is their Plateworks single-gang stainless steel wall plate with 1x Neutrik NC5MDL-1 "D-Series" 5-pin male XLR for DMX.

Kramer WU-AA Features: Front Panel Connections - USB Type A (F) Rear Panel Connections - USB Type A (F) on a flexible cable Size – Single insert

Stock standard Connectrix Aluminum wall panels (series model numbers WP100) are created from high strength aluminum alloy (6061-T6) that is .062" thick. Each standard Connectrix wall panel is finished with electro-static applied, oven-cure ...

Standard MP-100 Series Mini Pocket Panels are created from high strength aluminum alloy (6061-T6) that is .062" thick. Each standard panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the stan ...

MPR is a part of Mystery Electronics' ModuLine Insert Panels. It's a UL-Listed duplex receptacle (120 VAC/15 A), cover plate, and all hardware needed to connect to a power system. It's available on the FMCA series only and is field install ...

Neutrik 108E Single Gang etherCON Wallplate The 108E is a 1-gang wall plate with a Neutrik NE8FDP etherCON RJ45 feedthrough receptacle.

RDL's DB-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks. The XLR is connected directly to the rear-panel barrier block. The phono jacks are intended for mono or stereo consumer l ...

The QC101 from Quam is a UL Listed, single-gang, 100W, ten-step, continuous rotary, audio level attenuator with an OFF position. This model comes with a stainless steel face plate with embossed positions and a black knob. This unit is inte ...

XLR 3-pin female and 3-pin male jacks housed in a black Decora wall plate with rear terminal block connections. RDL DB-XLR2 Features: All-Steel Construction Compatible with Decora®-Style Mounting Accessories Rear Panel Connections on Term ...

Mystery Electronics' ModuLine inserts are fully interchangeable within their FMCA series and AW series products. Connectors and Labeling are available for Moduline Inserts. The MPK is punched for 4 Neutrik D or 4 Switchcraft D3F connectors ...

FSR's SMWB series of surface mount wall boxes are designed for surface mounting of standard wall plates. They can be used to conveniently mount accessories for FSR or any other manufacturer’s controls, switch panels, keypads and IPS wall ...

The Elite Core Audio OSP D-2-XLR is a single-gang stainless steel wall plate that includes two XLR female connectors.

Whirlwind Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4") and double gang (4 1/2"x 4-1/2"). The wallplates are standard as 1/16" thick but black ...

Stock standard Connectrix Aluminum wall panels (series model numbers WP300) are created from high strength aluminum alloy (6061-T6) that is .062" thick. Each standard Connectrix wall panel is finished with electro-static applied, oven-cure ...

The AT-Series of attenuators allows the output level of a network of 25V or 70V speakers to be controlled from a wall-mounted volume control, without affecting overall amplifier volume settings. The AT10A can handle speaker loads of up to ...

D plate with no jack cut out. Stainless steel.

The Atlas Sound WPD-VC10K is a decor style wall plate featuring an adjustable 10kOhm potentiometer designed to remotely control the level of connected Atlas Sound products such as amplifiers. The unit is constructed of durable ABS material ...

Standard MP-100 Series Mini Pocket Panels are created from high strength aluminum alloy (6061-T6) that is .062" thick. Each standard panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the stan ...

A single gang wall plate with dual Neutrik NE8FDP ethercon pass-through connectors. Specifications Dimensions: 4.5" x 2.75" Mounting Screws are included Mounting holes are countersunk and spaced to center the plate on standard gang electri ...

The DB Super Stage Pocket Narrow Cover Plate is manufactured from steel and come finished with an electro-static applied, oven cured black semi-gloss powder coat.

AtlasIED offers traditional auto-former controls to provide excellent stereo performance and maximum speaker-handling capability. The DAT35ST70 includes positive off and full-power pass through at the maximum setting. Contacts are make-bef ...