Wall Plates, Floor Boxes & Enclosures

This 14" x 28" DIN rail Enclosure offers a convenient location to house your devices. Designed to work with all ETC Unison Echo®, Unison Mosaic®, and Response™ devices, as well as additional third party products, this enclosure is idea ...

Electronic Control Plug-in Boxes or ECPBs allow lighting controls to connect and operate lighting and other equipment. Connections vary from industry standard DMX512 and Ethernet to portable houselight control and remote control devices. A ...

 

...

The ETC ECPB DMXIN/OUT is a 2 Gang DMX input and output wallplate designed for use with the RACO 691 (or equivalent) ECPB station back box (sold separately). ETC ECPB DMXIN/OUT Features: Faceplates are .80” aluminum Finished in fine text ...

ETC's E4VBB is a 4" installation box with a low-voltage barrier, intended for use with their Echo® Zone Controllers.

Electronic Control Plug-in Boxes or ECPBs allow lighting controls to connect and operate lighting and other equipment. Connections vary from industry standard DMX512 and Ethernet to portable houselight control and remote control devices. N ...

This back box is from ETC is 2.5" deep and is equipped with a surface mount.

This small DIN rail enclosure from ETC is 14" x 14" and easily mounted on your wall.

The NEMA 3R enclosure is designed for use as a wiring and/or junction box with the Xitanium drivers. A value-added solution, this enclosure shields an LED system’s driver and wiring, providing much needed protection in one versatile encl ...

The Philips Color Kinetics 120-000077-01 is the wiring compartment designed for use with the Philips Color Kinetics' eW/eColor Cove MX and Fuse Powercore systems as a direct connection to conduit. Comes with terminator. UL and cUL listed.

ETC's 9101V Multipin Outlet Box has been engineered for easy customization, shipment installation and service. The 9101V Multipin Outlet Box has revolutionary tension-clamp terminals for reliability and installation speed; heavy-duty endca ...

The Philips Color Kinetics 120-000077-02 is a wiring compartment designed for use with Philips Color Kinetics' iW/iColor Cove MX and Fuse Powercore G2 systems as a direct connection to conduit. Comes with terminator. UL and cUL listed.

The ETC UBOLT (part no. 4105K1003) is a U-Bolt hardware kit intended for use with ETC's Net3™ One- and Two-Port Gateways.

Part of the Power Distribution family, Outlet boxes from ETC are designed for surface or recess mounting in theaters, television studios and other spaces for distribution of lighting circuits. 9102C contains two Twist-Lock connector outlet ...

 

 

 

ETC 3-gang 2.5" Deep Back Box Surface Mount.