Rack Ears & Accessories

Middle Atlantic's MW-LA is a rack top option that is compatible with their WRK, MRK, VRK, VMRK, and DRK racks.  It accepts 6", 9", and 12" cable ladders.

The Atlas Sound TSD-RMK is designed to rack mount up to 4 TSD Series modules is a industry standard 19" 1RU rack space. Atlas Sound TSD-RMK Features: Supports up to 4 TSD Series Modules Only Requires 1 Rack Space (1RU) Black Brushed Alumin ...

The CMR is a cable management rod for organizing wire and cable in rackmount telecommunications, audio-visual and broadcast applications. The rod is 19”W and formed from 0.25" diameter cold rolled steel. The CMR is available straight or ...

When bolted between racks, each kit provides additional room for wiring and power distribution in multi-bay applications. Each 3-piece kit includes front, rear and top channels, as well as mounting hardware. This option is required when in ...

Grundorf's 39-002™ is a plastic screw mount port hole with a 2" inside diameter. Grundorf 39-002 Specifications: Color: Black Dimensions (HxWxD): 3.25" x 3.25" x 0.75" (82.55 x 82.55 x 19.05 mm)

Middle Atlantic's C5-KEY is a set of front door keys for their C5 Series credenza rack.

The patent-pending LeverLock™ internal management system facilitates cable management and device mounting within the rack interior through the use of unique tool free cable management bars and vertical accessory mounting plates. The Leve ...

Timesaving and practical, the Raised Floor Enclosure System™ consists of 2-1/2” high riser bases, which provide the ability to perform field rough-in procedures prior to the arrival of the racks and enclosures. Also handy as a lower cab ...

Magnetized vent blocker strips promote proper active thermal management when using exhaust fans. The VBK-BGR-SA is used on the BGR-SA and has a top, side panel, and rear door vent strips.

Cable chase for BGR 41 space rack.

Cable chase, top only, 4.4" width for BGR 38 space rack.

When properly installed, seismic floor anchor kits bring any seismic certified ERK Series enclosure to Seismic Design Category ‘D’, Zone 4 and Seismic Use Group III upper floor essential equipment rating and have an Ip rating of 1.5. I ...

Dual-Door Frame for 35U rack (mounts LFD-series 14U door on top & 21U door on bottom) The LDDF is an architecturally-appealing dual-door frame that solves the need to separate and secure equipment in a single rack installation. This attrac ...

The Allen & Heath ZED-10RK/19 is a rackmount kit that is designed for use in installing a ZED-10 or ZED-10FX mixer into a standard 19" equipment rack.

Middle Atlantic's LBP-4R90 is constructed from 1/4" diameter rod with a flattened end and features a 90° bend to provide clearance around components that extend past the rear rackrail. All lacer bars sold in packs of 10. Style: 90 degrees ...

Flexible application for vertical cable management on open frame racks! Plastic Cable Ducts provide a cost effective solution to protect, route and organize data cables, patch cords, and power cords. Specifications: 3" Width 3" Depth, sing ...

Middle Atlantic's 5-RS14 is a runner kit designed to allow the HRF Half Rack to slide in and out of cabinets and lecterns.

Middle Atlantic's PB-90 is a set of (2) mounting brackets to mount a power strip so that the outlets face the front or back of the enclosure.

Middle Atlantic's LL-HC21 is a 21" horizontal channel lever lock.  The patent-pending LeverLock™ internal management system facilitates cable management and device mounting within the rack interior through the use of unique tool free cab ...

The CMBS is a slotted cable management bar for lacing wires and cables. The bar is formed from 14-gauge steel and measures approximately 19"W (483mm) x 0.625"H (16mm). It’s available straight or offset (2", 4" or 6"D). Offset bars are st ...

The CMBS is a slotted cable management bar for lacing wires and cables. The bar is formed from 14-gauge steel and measures approximately 19"W (483mm) x 0.625"H (16mm). It’s available straight or offset (2", 4" or 6"D). Offset bars are st ...

The ECM-RACEWY1 is designed to house a single ECM module to provide a single 20A or 30A AC leg for up to 120A of power distribution. There are four ½" and ¾" dual knockouts that support standard electrical conduit components for wiring 1 ...

Middle Atlantic's LL-VC21-4 is a pack of (4) Vertical Channel Lever Locks.  The patent-pending LeverLock™ internal management system facilitates cable management and device mounting within the rack interior through the use of unique tool ...

Middle Atlantic's LL-HA21-4 is a pack of (4) Horizontal Angle Lever Locks. The patent-pending LeverLock™ internal management system facilitates cable management and device mounting within the rack interior through the use of unique tool ...