Stands, Racks & Mounts

LWR Series racks are heavy duty, sectional wall-mount racks with a steel backbox and separate front cabinet, boxed separately so the back can be field-installed while the front is loaded at the shop. Includes adjustable front mounting rail ...

Lowell's VR-4 is an essential space saver that holds equipment vertically while mounted to a wall. The unit is available in two, three, or four rack units, and is also a great selection for under-desk mounts. With 16-gauge certified U.S. s ...

The Lowell C2S caster kit is a set of four swivel casters with a load capacity of 500 lbs. Each caster has a diameter of 2".

Designed for light-duty settings, the WSL-1814 wall-mount shelf from Lowell holds up to 40 lbs (18 kg). It's well-suited for in-closet wiring applications and is constructed with a single piece of 16-gauge steel that's been formed and bolt ...

Lowell's LLR-1218-B is a rack constructed from a sturdy wood composite and finished in a premium Cathedral Black woodgrain laminate. This rack cabinet is well-suited for the home office or entertainment area. Lowell LLR-1218-B Features: 5/ ...

Lowell's AFP-2 is a 2RU aluminum rackmount panel with a black wrinkle finish. Lowell AFP-2 Specifications: Material: 1/8" (3 mm) aluminum Finish: Black wrinkle Width: 19" Height: 2RU E.I.A. compliant Made in the U.S.A.

Lowell's AFP-4 is a 4RU aluminum rackmount panel with a black wrinkle finish. Lowell AFP-4 Specifications: Material: 1/8" (3 mm) aluminum Finish: Black wrinkle Width: 19" Height: 4RU E.I.A. compliant Made in the U.S.A.

Lowell's LWR-1023 is a heavy duty sectional wall rack featuring a front section that swings open to access wires and equipment. Lowell LWR-1023 Features: Backbox: 5.80" deep with keyhole mounting slots on 16" centers, center opening to mou ...

Lowell's CMBS is a straight rackmount bar with multiple tie-down slots and holes for efficiently controlling wires and cables. This steel bar is also suitable as support bracing for equipment when used with mid or rear-rails. The CMBS can ...

Lowell's RLB-KIT-60P includes two magnetic-mount light bars designed for 35RU and larger racks. The light bars can fit vertically in rear rack corners or rails, and feature a proximity switch, which turns on when your presence is detected. ...

Lowell's LTR-420S is a surface mount wall rack designed for amplifiers, mixers, PA systems, consumer electronics and more. It stores 19" wide equipment out of the way, holding it vertically until the front panel is lowered for operation or ...

Lowell LSB-27 Stationary Platform Rack Base for 27” Deep Racks Often required to support heavy equipment that is mounted in the lowest rack space, the LSB-27 stationary base is designed to mount inside the rack frame to provide a floor p ...

Lowell CBP-1 Cable Management Panel with Brush Strip, 1U The CBP-1 is a 19-inch rack mount panel with a cable tray and a brush strip to organize wires and cables in your rack. You can fit cables between the brush bristles to keep out dust ...

Lowell's USV-214 Utility Shelf is a rugged steel shelf that provides support for non-rackmount equipment. Lowell USV-214 Includes: USV-214 Utility Shelf Lowell USV-214 Features: 16-gauge steel with fully vented base Notches in rear flange ...

Lowell's UDP614 Rackmount steel utility drawer is fully welded steel that mounts to rails of 19" equipment racks. It features a rear bushing for cable pass-through. Lowell UDP614 Includes: UDP614 Rackmount steel utility drawer Lowell UDP61 ...

Lowell's USM-210 Utility Shelf is 19 inches with multiple mounting holes and slots in the base providing a variety of tie-down points. Lowell USM-210 Includes: USM-210 Utility Shelf Lowell USM-210 Features: Unique hole and slot arrangement ...

The Lowell LER-4432 is a fully welded stand-alone floor rack reinforced at load-bearing junctions for robust support. The welded side panels feature upper and lower vents for passive ventilation. The rack includes adjustable mounting rails ...

Lowell WMS-CPU-8 10x8D Wall Mount Shelf for CPU The WMS-CPU-8 computer tower shelf saves space in the work area by moving the personal computer from the desktop into its own space without having to place it on the floor. The shelf mounts e ...

Lowell's RRB-3 are steel brackets that recess any rackmount equipment 3 inches from the front of the rack rail. Lowell RRB-3 Includes: RRB-3 Rack recessing brackets Lowell RRB-3 Features: Includes hardware Sold in pairs Note: Brackets are ...

The thumb-turn cam latch serves as a replacement for the key lock mechanism on the rear door of a rack, offering a convenient keyless entry solution. This latch is particularly suitable for racks situated in secure environments where the u ...

The Lowell Manufacturing 14" deep, 8 RU tall, black Half-Rack is a fully welded steel open frame half-width rack specifically designed for accommodating non-standard electronics. Its exceptional design allows for equipment mounting on the ...

The blank aluminum panels, designed for 19-inch racks, are coated with a black wrinkle textured powder epoxy finish and feature a flange that enhances their structural integrity. These panels are offered in sizes ranging from 1 to 6 rack u ...

The low profile 1U x 19-inch panel is constructed with steel and coated in a black powder epoxy finish. It is equipped with four blower fans that operate by drawing air from within the rack and expelling it through the front vents. For enh ...

Half-width rack blank panels for the LHFR Series feature a half-inch flange for enhanced strength and durability, made of steel with a smooth black powder epoxy finish. Lowell SEPH-2 Specifications: Panel Height: 2U Material: Steel with sm ...