Stands, Racks & Mounts

Lowell CP8 Series protective backboxes with extended grille mounting flange are designed for recessed installation of distributed 8" speaker systems. Extended flange makes them ideal for use in new construction where the flange protects th ...

Tile bridges are often required, for safety reasons, by local building codes, and for aesthetics to reduce the potential of unsightly ceiling tile sag. Lowell tile bridge Model LUH-TBAR is engineered specifically to distribute the UnihornT ...

The LER is an E.I.A. compliant rack (UL Listed, Standard 1678) that offers solid structural support and code compliance to mount and secure 19" wide electronic equipment. Rack is fully welded 16-ga. steel with a 14-ga. steel bottom and rei ...

Dual-Door Frame for 24U rack (mounts LFD-series 10U door on top & 14U door on bottom) The LDDF is an architecturally-appealing dual-door frame that solves the need to separate and secure equipment in a single rack installation. This attrac ...

The economical SEP-series of blank rack panels for 19" wide EIA racks are made with 18-gauge certified US steel and have a 0.625" flange. Panels are finished in a smooth black semi-gloss powder epoxy paint. Available in single units, contr ...

The economical SEP-series of blank rack panels for 19" wide EIA racks are made with 18-gauge certified US steel and have a 0.625" flange. Panels are finished in a smooth black semi-gloss powder epoxy paint. Available in single units, contr ...

The LER is an E.I.A. compliant rack (UL Listed, Standard 1678) that offers solid structural support and code compliance to mount and secure 19" wide electronic equipment. Rack is fully welded 16-ga. steel with a 14-ga. steel bottom and rei ...

The CMR is a cable management rod for organizing wire and cable in rackmount telecommunications, audio-visual and broadcast applications. The rod is 19”W and formed from 0.25" diameter cold rolled steel. The CMR is available straight or ...

Optional brackets that mount to OS Series Speakers' 1/4” - 20 mounting points. Note: Product shown in image is the black model, OS-BRKT-W is white.

The RRD-series of reversible mounting rails were designed to accommodate different types of hardware on a single rail. The dualhole pattern rails are tapped on one side (to accept threaded 10-32 screws) and square-punched on the other side ...

The LDSR-series rack measures 18"D at the base and features a 12-degree slope so equipment can be viewed from a seated position. Sturdy design is 16-gauge certified US steel, with fixed front mounting rails tapped 10-32 and recessed .562" ...

The LER is an E.I.A. compliant rack (UL Listed, Standard 1678) that offers solid structural support and code compliance to mount and secure 19" wide electronic equipment. Rack is fully welded 16-ga. steel with a 14-ga. steel bottom and rei ...

The LXR is the economical solution for equipment stored in cabinetry or credenzas, under counters or desks, or in any narrow area. The slim (19.21") width provides a narrow footprint for mounting standard 19"W EIA equipment. Four corner po ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...

Dual-Door Frame for 35U rack (mounts LFD-series 14U door on top & 21U door on bottom) The LDDF is an architecturally-appealing dual-door frame that solves the need to separate and secure equipment in a single rack installation. This attrac ...

Lowell's aluminum trim plate for Unihorn covers rough openings in recessed installations. 11.5" square.

The LHR is a two-part rack that consists of an exterior enclosure and an interior rollout/rotating rack. It combines the advantages of a small footprint with superior accessibility to mounted equipment, cables and wiring. Models are availa ...

The LHR is a two-part rack that consists of an exterior enclosure and an interior rollout/rotating rack. It combines the advantages of a small footprint with superior accessibility to mounted equipment, cables and wiring. Models are availa ...

The LHR is a two-part rack that consists of an exterior enclosure and an interior rollout/rotating rack. It combines the advantages of a small footprint with superior accessibility to mounted equipment, cables and wiring. Models are availa ...

The LHR is a two-part rack that consists of an exterior enclosure and an interior rollout/rotating rack. It combines the advantages of a small footprint with superior accessibility to mounted equipment, cables and wiring. Models are availa ...

The IP-ID-1 is a 19" (1U) steel rackmount panel with PocketIDTM label area to identify equipment installed above and below the panel. The panel has a smooth, semi-gloss, black powder epoxy finish.Composition: 18-gauge US steel Features: Si ...

Ready-to-install (19"W x 7U) 16-ga. steel panel with one mounted 10” dia. x 3.5"D tubeaxial fan and front/rear guards. Powerful turbo-style fan with feathered edges for lower noise features 550 cfm airflow rating and low 50.8 dBA noise r ...

Lowell's DX104 backbox for 4-inch speakers is acoustically engineered for professional sound installations where the highest quality sound reproduction and fidelity must be attained. It is an acoustically treated large volume design allowi ...

Ready-to-install, 16-ga. steel, 19”W panel includes mounted 4.7” (120mm) diameter whisper-quiet fans with front guards. Each fan has a 50 cfm airflow rating and a quiet 28 dBA noise rating. Features: Fan panels are made in the U.S.A. w ...