Stands, Racks & Mounts

The LER is an E.I.A. compliant rack (UL Listed, Standard 1678) that offers solid structural support and code compliance to mount and secure 19" wide electronic equipment. Rack is fully welded 16-ga. steel with a 14-ga. steel bottom and rei ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...

The SG6P-3 is a 19" (3U) steel rackmount panel with six punched openings to front-load up to six standard wallplate devices that install with two screws. The panel was engineered to provide a solution for mounting 1-gang devices that have ...

The E.I.A. compliant, UL Listed (Standard 1678) sectional wall-mount rack consists of a sturdy steel backbox and mounting section that are boxed separately for convenience (the backbox can be field-installed while the mounting section is l ...

The D8P-ID-3 is a 19" (3U) steel rackmount panel with eight punched openings to hold up to eight (1-gang) Decora® style devices, and a PocketIDTM label area. The panel uses minimal rack space while providing an organized solution for moun ...

Lowell's UDE series of utility drawers feature fully welded construction of 16-gauge steel. The drawers mount to front rack rails using standard EIA spacing and feature ball-bearing slides for smooth operation. Drawers have a load capacity ...

The LMB mobile base is designed to mount inside the rack frame to provide the benefits of mobility and a floor positioned flush to the bottom rack space. This model is often specified to support extra-heavy equipment that is mounted in the ...

The E.I.A. compliant, UL Listed (Standard 1678) sectional wall-mount rack consists of a sturdy steel backbox and mounting section that are boxed separately for convenience (the backbox can be field-installed while the mounting section is l ...

Designed for built-in applications in credenzas, cabinetry, or millwork, this rack's top section slides forward on four support rails, allowing rotation left or right and locking at 60 or 90 degrees for easy access to equipment. It feature ...

The LER is an E.I.A. compliant rack (UL Listed, Standard 1678) that offers solid structural support and code compliance to mount and secure 19" wide electronic equipment. Rack is fully welded 16-ga. steel with a 14-ga. steel bottom and rei ...

Middle Atlantic's LWR Series racks are heavy duty, sectional wall-mount racks with a steel backbox and separate front cabinet, boxed separately so the back can be field-installed while the front is loaded at the shop. Includes adjustable f ...

The E.I.A. compliant, UL Listed (Standard 1678) sectional wall-mount rack consists of a sturdy steel backbox and mounting section that are boxed separately for convenience (the backbox can be field-installed while the mounting section is l ...

An ideal solution for existing or new installations. Lowell's conically shaped backbox Model 8PSBX is engineered to accommodate an 8" speaker in either new or existing construction. The slightly tapered, conical shape allows this backbox t ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...

Lowell's LWR-719 is a heavy duty sectional wall rack featuring a front section that swings open to access wires and equipment. Lowell LWR-719 Features: Backbox: 5.80" deep with keyhole mounting slots on 16" centers, center opening to mount ...

This economical 16-gauge steel rack with welded sides offers an open front/back and is finished in black wrinkle powder epoxy. Features: Fixed-position front AND rear rails, tapped 10-32 Knockouts on top/bottom Protective rubber feet Made ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...

Economical rack includes mounting section that attaches to backbox with heavy-duty bolts through steel fasteners with securing nuts. Lowell LWSR-1022 Features: Backbox has center locks keyed differently than (optional) front door. Knockout ...

Tile bridge model LBS8-CP is engineered to distribute the weight of an 8" speaker assembly to the ceiling support system in a suspended 2' x 2' or 2' x 4' tile ceiling system. A tile bridge is often required by local building codes for saf ...

The economical LWER is a contemporary solution to house electronics in snall system installations like schools and offices. It's ideally suited for light to medium loads (up to 150 lbs.) where easy access to the rear is not a priority. The ...

The D9P-ID-3 is a 19" (3U) steel rackmount panel with nine punched openings to hold up to nine (1-gang) Decora® style devices, and a PocketIDTM label area. The panel uses minimal rack space while providing an organized solution for mounti ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...

The US-series of steel utility shelves are solid, general-purpose shelves that mount to 19"W racks. They provide sturdy support for non-rackmount equipment such as consumer electronics, power supplies and chassis-style components of all ki ...

LFD front doors (solid steel, fuly-vented or smoked Plexiglas) with recessed handles are engineered to work with Lowell 19"W equipment racks in rack series listed. The surface-mount doors feature 180° swing and can be changed from right t ...