Connectors, Adapters & Bulk Cable

The Pro Co Monoface MC-2 Mic Combiner passively combines the signals from two low-impedance microphone (or similar sources) into a single output. It is a handy "band-aid" for situations where the number of microphones required exceeds the ...

ITX is a compact custom-made audio isolation transformer providing a floating XLR-type output from an unbalanced source in a convenient package. Female XLR-type input. Male XLR-type output. Usable for 600 ohm 1:1.

The 11-4-100 from ProCo is a 100' 11AWG unshielded speaker cable with two twisted pair conductors, PVC jacket, PVC insulation, and highly stranded bare annealed copper. Specifications Number of Conductors: 4 Wire Gauge: 11 AWG Conductor Ma ...

The 11-4-200 from ProCo is a 200' 11AWG unshielded speaker cable with two twisted pair conductors, PVC jacket, PVC insulation, and highly stranded bare annealed copper. Specifications Number of Conductors: 4 Wire Gauge: 11 AWG Conductor Ma ...

The 16-2-150 from ProCo is a 150' 16AWG two-conductor unshielded speaker cable with a PVC jacket for loudspeaker interconnection. Specifications Number of Conductors: 2 Wire Gauge (AWG): 16 Stranding / Strand (AWG): 65 / 34 % of Shield Cov ...

 

Helps eliminate PA/recording system hum and buzz. Pins 2 and 3 are carried through, Pin 1 is not. Female XLR-type input. Male XLR-type output.

For balancing and isolation of line-level outputs from mixers, equalizers, crossovers, and other equipment. 1/4" (6.35mm) T/R/S and female XLR-type input (with parallel 1/4" and male XLR-type output). 1/4" T/R/S and male XLR-type transform ...

Converts low-Z XLR-type microphone input to bridging 1/4" line-level input. Allows low-Z XLR-type inputs to be used as line-level inputs (typically from unbalanced keyboards) to eliminate "de-normalizing" of tape signals and excessive patc ...

10 dB Mic Attenuator( XLR-F to XLR-M)

MAX-20 provides 20 dB attenuation (pad). XLR female to male connector.

30 dB Mic Attenuator (XLR-F to XLR-M)

For splitting the signal from a low-Z balanced microphone between 2 mixers. Female XLR-type input. 2 male XLR-type outputs (Direct and Isolated). Isolated output has ground lift switch. Uses Pro Co MBT-1 transformer (150 ohm 1:1).

For splitting the signal from a low-Z balanced microphone between 3 mixers. Female XLR-type input. 3 male XLR-type outputs (1 Direct and 2 Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2 transformer (150 ohm 1:1:1) ...

May be used to prevent out-of-phase cancellation and can be used to create special stereo effects. Pins 2 and 3 are cross-wired. Pin 1 is carried through. Female XLR-type input, Male XLR-type output.

For splitting the signal from a low-Z microphone between 2 mixers. 4 channels, each with female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-1 transformers (1 ...

The Pro Co MS-82P splits the signals from each of eight low-Z microphones (or similar sources) into two outputs: one direct and one isolated. Includes a phantom power buss for powering condenser microphones. All connections are made via co ...

The Pro Co Multiface MS-82 Eight- Channel Mic Splitter splits the signals from each of eight low-impedance microphones (or similar sources) into two outputs, enabling two microphone preamplifiers to be fed from one source. The primary appl ...

For balancing and isolation of line-level outputs from mixers, equalizers, crossovers, and other equipment. 8 channels, each with female XLR-type input, and male XLR-type isolated output with ground lift switch. Uses Pro Co LOT-1 transform ...

The Pro Co TradeTools MS83 Eight-Channel Mic Splitter splits the signals from each of eight low-impedance microphones (or similar sources) into three outputs, enabling three microphone preamplifiers to be fed from one source. The primary a ...

Pro Co's ITX-Q is the same as their ITX audio isolation transformer, except with a 1/4" (ø6.35mm) phone plug input. Pro Co ITX-Q Isotransformer Inline Specifications: Male XLR-type output Tip wired in-phase with pin-2 Usable for 600 Ohm 1 ...

Pro Co's TradeTools IT4A Isolation Transformer Unit provides four high-quality 1:1 line-level output transformers for applications requiring a high degree of electrical isolation only transformers can provide. The primary applications for ...

Pro Co's DMX4U-BI-6, a DMX 4 Universe over CAT cable break-in fan, features a BLOX unit with 6ft tails to Neutrik NC5FXX-B connectors employing DMX-1PR.

The Pro Co DMX4U-BO-6, a DMX 4 Universe over CAT cable break-out fan, has a BLOX unit with 6ft tails to Neutrik NC5FXX-B connectors working with DMX-1PR.