Rentals

Miscellaneous Audio

   [request quote]

Clearsonic A4-3 4' x 2' 1-Section Clear Acoustic Isolation Panel with Hinge

ClearSonic Panels (CSP) provide acoustic separation between instruments on stage or in the studio. This helps reduce drum bleed into vocal or instrument mics and lowers stage volume so that everyone can hear themselves better. Note: Product shown in image is for illustrative purposes only - actual product is 3-panel shield only.

1 Day3 Days7 Days14 Days30 Days
10.00 15.00 30.00 50.00 70.00

 

   [request quote]

Galaxy Audio CM140CHECKMATE SPL Meter

Galaxy Audio's CHECK MATE is an inexpensive tool that meets the same IEC 651 Type 2 standards of SPL meters that cost 5 times as much or more. The CHECK MATE allow musicians, sound contractors, and others to measure SPL in decibels (dB).

1 Day3 Days7 Days14 Days30 Days
10.00 15.00 30.00 50.00 70.00

 

   [request quote]

JK Audio HOST Analog Desktop Digital Hybrid

Broadcast Host turns your desktop into a professional broadcast center. Contains everything you need to get talk show quality phone recordings into your mixer or sound card. Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use Broadcast Host in your newsroom to record high quality interviews. Broadcast Host allows you to send mic and line level signals into the phone line while maintaining excellent separation between your voice and the caller. The stereo output jack on the back of the unit provides your voice on one channel and only the caller's voice on the other channel. The balanced XLR output jack contains only the caller's voice. The digital hybrid connects audio signals to a standard analog telephone line without the transmit/receive crosstalk common to analog hybrids. The Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line. Broadcast Host provides connections for a microphone, headphones, mixer, sound card, telephone and your analog telephone line. An auxiliary telephone is only required to place outgoing calls. The auxiliary telephone is disconnected when you press the "Call" button, and reconnected when you press the "Drop" button. Broadcast Host features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications. Other applications include: telephone interviews, talk shows, church PA interface, and conference room full duplex applications.

1 Day3 Days7 Days14 Days30 Days
20.00 30.00 60.00 100.00 140.00

 

   [request quote]

JK Audio THAT-2 Telephone Handset Audio Tap

Connect THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bytes, and by TV and film sound crews to get IFB dialog over phone lines. The THAT-2 is the big brother of our model THAT-1, which is very popular with news reporters for its small yet rugged design. Over the years we’ve heard from many of our customers that they liked the THAT-1 but would prefer professional XLR jacks and compatibility with more telephone systems. Here is the answer... The THAT-2, a passive handset interface with professional and consumer jacks, separate input and output volume control, a selector switch for the different types of telephone systems, and still no batteries or AC needed. Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. Now connect your audio equipment or powered speaker to the RCA or XLR jacks. The grey pushbutton selects which audio will be sent into the telephone (OUT = talking on the handset, IN = sending audio in through the RCA jack). The output jacks contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. The THAT-2 has a three-position switch which accommodates electret, dynamic and carbon telephone handset microphone types. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN telephones.

1 Day3 Days7 Days14 Days30 Days
7.50 11.25 22.50 37.50 52.50

 

   [request quote]

Kramer 105A 1:5 Stereo Audio Distribution Amplifier

The Kramer 105A is a high performance distribution amplifier for unbalanced stereo audio signals. It takes one stereo input and distributes the signal to five identical stereo outputs. Specifications: Level (Gain) Controls. S/N Ratio - 80dB (unweighted). Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions. Input: 1 audio stereo/balanced mono,1Vpp/33kohm; on a 3.5mm mini phone connector. Outputs: 5 audio stereo/balanced mono 1Vpp/50ohm; on 3.5-mm mini phone connectors. Max. Output: 5 Vpp (> +4dBm). Audio Bandwidth: (-3dB); 20kHz.

1 Day3 Days7 Days14 Days30 Days
5.00 7.50 15.00 25.00 35.00

 

   [request quote]

Radial Engineering TWIN-ISO Radial Twin Isolator

The Radial Twin-Iso is a balanced 2-channel, line-level isolator that has been specifically developed for professional touring systems as a means to eliminate hum and buzz caused by ground loops when interfacing various equipment such as two consoles, remote towers and drive racks. Central to the Twin-Iso is the use of world-renowned Jensen audio transformers. These assure the very best signal transfer without distortion caused by saturation or phase shift. All connections are balanced XLR following the AES standard with pin-1 ground and pin-2 hot. To add versatility, a polarity reverse switch is provided for each channel to ensure absolute phase is maintained throughout the audio signal path.

1 Day3 Days7 Days14 Days30 Days
12.50 18.75 37.50 62.50 87.50

 

   [request quote]

Whirlwind LM2B Line Driver, 2ch MXLR-RCA

The Whirlwind LM2 Level Matchers are unique, high quality solutions for converting analog audio levels and impedances between –10 dBV "consumer" or "semi-pro" (also known as IHF standard) unbalanced equipment and +4 dBm balanced professional equipment. The LM2B is the "up converter," amplifying unbalanced IHF signals 14 dB and providing balanced output signals. The LM2U functions in reverse, taking balanced +4 dBm professional levels, actively attenuating them and delivering unbalanced outputs at IHF levels. Both converters use extremely quiet, high quality active circuits with adjustable gain controls so that signal levels from various devices of gear can be matched to one another.

1 Day3 Days7 Days14 Days30 Days
5.00 7.50 15.00 25.00 35.00

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.