Product Overview
iColor MR gen3 is an intelligent color-changing lamp that delivers intense, saturated bursts of color and color-changing effects. The stylish housing fits into most standard MR16 fixtures, including tracks, cables, rails, and pendants. With high-intensity LED light sources and three beam angles, iColor MR gen3 is suitable for a wide-range of architectural, theatrical, and retail applications.
Philips Color Kinetics 101-000074-01 Features:
- Standard GU5.3 base and two-pin MR16 connector
- Works with standard 2-conductor jacketed cable or hook-up wire. Power /data supplies specifically designed for use with iColor MR gen3 multiplex power and data onto a two-wire circuit for use with conventional MR16 fixturesand sockets.
- Use the 17° lamp when you need a spot of light with sharply defined edges,the 30° lamps for a wider spread of light, and the 90° (no optic) lamp for a soft, diffuse light.
- Easily adaptable to a wide range of interior environments where MR16 fixtures are commonly used. With long useful source life, low power draw of just 5 W, and low-maintenance operation, iColor MR gen3 lamps cost significantly less to own and operate than conventional MR16 lamps.
- Works seamlessly with the complete Philips Color Kinetics line of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, as well as third-party controllers.
Philips Color Kinetics 101-000074-01 Specifications:
- Output
- Lumens*: 151
- LED Channels: Red / Green / Blue
- Lumen Maintenance†: 100,000 hours L70 @ 40° C 100,000 hours L70 @ 25° C /100,000 hours L50 @ 40° C 100,000 hours L50 @ 25° C
- Electrical
- Input Voltage: 24 VDC from PDS-70mr
- Power Consumption: 5 W maximum at full output, steady state
- Control
- Interface: PDS-70mr 24V (DMX / Ethernet)
- Control System: Philips Color Kinetics full range of controllers, including Light System Manager, iPlayer 3, and ColorDial Pro, or third-party controllers
- Physical
- Fixture Connections: Standard 2-pin MR16 connector
- Temperature Ranges
- -4° – 104° F (-20° – 40° C) Operating
- -4° – 104° F (-20° – 40° C) Startup
- -40° – 176° F (-40° – 80° C) Storage
- Humidity 0 – 95%, non-condensing
- Maximum Fixture Run 14 maximum per PDS-70mr
- Maximum cable length 50 ft (15 m)
- Certification/Safety
- Certifications: UL / cUL, FCC Class A, CE
- Environment: Dry Location, IP20
NOTES:
Due to continuous improvements and innovations, specifications may change without notice.
* Lumen measurement complies with IES LM-79-08 testing procedures.
† L70 = 70% lumen maintenance (when light output drops below 70% of initial output). L50 = 50% lumen maintenance (when light output drops below 50% of initial output). Ambient luminaire temperatures specified. Lumen maintenance calculations are based on lifetime prediction graphs supplied by LED source manufacturers. Calculations for white-light LED fixtures are based on measurements that comply with IES LM-80-08 testing procedures.