Panasonic PT-DW640US
6000 Lumes WXGA 1-chip DLP Wide Screen Projector in Silver

OUR PART #  PTDW640US

Our Price: $4,449.00List Price: $8,199.00
You save 46%!
Qty:

In Stock

High Brightness with High-Power AC Lamp

The high-efficiency light convergence technology and the color wheel work together to achieve the high brightness of 6,000 lm for the PT-DW640.  Clear, crisp images are reproduced even in bright rooms.

RGB Booster Significantly Improves Color Reproduction

The RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out.  It combines Panasonic's proprietary Vivid Color Control technology with a newly engineered Lamp Modulation Drive System for a 1-chip DLP™ projector that produces bright and vivid colors.

Vivid Color Control

This unique control technology optimizes the use of the color segment areas of the color wheel.  It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring.

Lamp Modulation Drive System

With the advanced lamp modulation technology, the projector is able to control the lamp intensity for each of the red, green, blue, and white segments of the color wheel separately.  Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness.  This results in bright vivid images with increased color fidelity.

Detail Clarity Processor Brings Depth and Clarity to Details

This advanced image-processing circuit analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly.  The resulting images have a more natural, three-dimensional appearance with crisp, clear detail.

 
System Daylight View 2 for Enhanced Color Perception
 
Image details are less clear when a projector is used in a room with the lights on.  Panasonic's System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and color corrections.  This produces crisper, more stunning images with vivid colors even under bright conditions.
 
DICOM Simulation Mode*
 
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
*This product is not a medical instrument. Do not use it for actual medical diagnosis.
 
Rec. 709 Mode for HDTV Projection

Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.

Eco Filter that Needs No Maintenance for up to 12,000 Hours*
 
The original Eco Filter consists of two Micro Cut Filters (electrostatic filters), a pre-filter and a main filter, which use an ion effect to collect extremely small dust particles. The pre-filter has a honeycomb configuration and the main filter is pleated to achieve a large surface area that raises its dust collecting performance. Thanks to these features, the Eco Filter has a replacement cycle of up to 12,000 hours,* which reduces the hassle of maintenance. And, as an environmental consideration, the filter can be washed with water and reused.**
*The usage environment affects the duration of the filter.
**When washing with water, please follow the procedures listed in the operating instructions.  Also, Panasonic recommends replacing the filter with a new one after it has been washed and reused twice.  If the filter is not sufficiently clean after washing, replace it with a new one.
 
Dual-Lamp System Prevents Image Interruptions
 
The Dual-Lamp System eliminates the need to interrupt a presentation if a lamp should burn out (in dual-lamp operation mode).  The Lamp Relay mode also operates the lamps alternately to enable 24/7 projector operation.
Dual-Lamp System
Dual-Lamp System
Lamp Relay Mode
 
Liquid Cooling System Attains a High Level of Reliability
 
Panasonic's unique liquid cooling system directly cools the DLP™ chip to improve performance and enable operation up to 45°C (113°F).*  This allows use in a wider variety of environments, while stabilizing performance and keeping the unit quiet even in harsh conditions.  It also contributes to realizing the compact body.  Plus, Panasonic’s liquid cooling system is hermetically sealed, so you don’t need to replenish the liquid.
*The operating temperature range is 0°C to 40°C (32°F to 104°F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level).  Also, if the ambient temperature exceeds 40°C (104°F) (35°C (95°F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.
Flexible Installation
 
The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation.  It lets you easily make adjustments with the remote control.  The unit can also be rotated 360 degrees vertically.  This means you can install it at any angle you want, to accommodate different installation conditions.
 
 
A Wide Range of Optional Lenses*
 
Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use.  The additional lenses make it easy to adapt your projector to the installation site.  The lenses attach and detach with one-touch ease.
*Lenses are sold separately.
 
Lens-centered Design
 
A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.
 
Easy Replacement of Filter and Lamp
 
An Eco Filter is replaced from the side and lamps are replaced from the back panel.  Both of them are replaced very easily even after the projector is installed on the ceiling.
 
Multi-Screen Support System Seamlessly Connects Multiple Screens
 
The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching and multi-screen processor.
  • Edge Blending: The edges of adjacentscreens can be blended and their luminance controlled.
  • Color Matching: This functioncorrects for slight variations in the color reproduction range of individualprojectors.
  • Multi-Screen Processor: The PT-DZ680Series projectors can project large, multi-screen images without anyadditional equipment. Up to 100 units (10 x 10) can be edge-blended at atime.
 
Side-by-Side Function*
 
The PT-DW640 can simultaneously display images from two sources onto a single screen.  For example, you can display a PC image on the left and a video image on the right.  Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.
*This function is not effective for some source combinations.
 
Versatile System Configurations Match a Variety of Applications
 
The wide-ranging terminals include 2 sets of RGB inputs (compatible with Y/PB/PR signals), an HDMI input, and a DVI-D input.  A serial input/output terminal (RS-232C compliant) that allows remote operation from a PC, similar to that of a wireless remote control, and a remote terminal for input switching by contact control and standby ON/OFF operation also make it possible to configure a remote operation system.
 
Easy Remote Monitoring and Control over a LAN
 
Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status.  An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.
 
In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
 
The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
 
Crestron RoomView™ and AMX Device Discovery
 
The LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices.  Besides, the AMX Device Discovery technology is built in the PT-DZ680 Series projectors.
 
Wireless Remote Control with a Maximum Operating Range of 30 m (98 ft)
 
Wireless Remote Control provides greater convenience for large conference rooms, lecture halls and gymnasiums with large audiences. Also, two signal transmission ports are provided to enable a large operating area.
 
Signal transmission ports

Standby Mode: ECO*
 
The PT-DZ680 Series projector has attained a low standby power level of 0.2 W** (STANDBY MODE: ECO*).  It also helps to slash running costs, and reduces environmental impact.
*When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate.  Also, only certain commands can be received for external control using the serial terminal.
**For 120 V AC power supply. 0.3 W for 200-240 V AC power supply.
Other Valuable Features:
  • 3D color management system
  • HD IP conversion
  • Digital noise reduction
  • Dynamic sharpness control
  • Scheduling function
  • Mechanical lens shutter
  • Direct Power Off allows unplugging the power cordright after use
Specifications:
  • Power Supply: 120 V AC, 6.8 A, 50/60 Hz, 220-240 V AC,3.8 A, 50/60 Hz
  • Power consumption:
    - 120 V AC: 710 W (740 VA) (0.2W when STANDBY MODE set to ECO*, 6 W when STANDBY MODE set to NORMAL)
    -220-240 V AC: 690 W (860 VA) (0.3 W when STANDBY MODE set to ECO*, 8 W whenSTANDBY MODE set to NORMAL)
    *When the STANDBY MODE is set to ECO, networkfunctions such as power on over the LAN will not operate.  Also, onlycertain commands can be received for external control using the serialterminal.
  • DLP Chip:
    - Panel Size: 0.65" (16.5 mm) diagonal(16:10 aspect ratio)
    - Display Method: DLP chip x1, DLP protectionsystem
    - Pixels: 1,024,000 (1,280 x 800) pixels
  • Lens: Powered zoom (throw ratio 1.8-2.4:1), poweredfocus F 1.7-2.0, f 25.6-33.8 mm
  • Lamp: 280 W UHM lamp x2
  • Screen size (diagonal): 1.27-15.24 m (50-600inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055, 16:10 aspectratio
  • Brightness**: 6,000 lm (dual-lamp, LAMP MODE:NORMAL)
  • Center-to-corner uniformity**: 90%
  • Contrast**: 2,000:1 (full on/full off, CONTRASTMODE: HIGH***)
    ** Measurement, measuring conditions, and method of notationall comply with ISO 21118 international standards.
    *** Brightness becomes3,000 lm with contrast mode set to high.
  • Resolution: 1,280 x 800 pixels (Input signalsthat exceed this resolution will be converted to 1,280 x 800 pixels)
  • Scanning Frequency:
    - HDMI/DVI-D: fH: 15-91kHz, fV: 50-85 Hz, dot clock: 25-162 MHz
    - RGB: fH: 15-91 kHz, fV:50-85 Hz, dot clock: 162 MHz or lower
    - YPBPR (YCBCR): fH: 15.75 kHz, fV:60 Hz [480i (525i)], fH: 31.50 kHz, fV: 60 Hz [480p (525p)], fH: 45.00 kHz,fV: 60 Hz [720 (750)/60p], fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i], fH:28.13 kHz, fV: 50 Hz [1080 (1125)/50i], fH: 27.00 kHz, fV: 24 Hz [1080(1125)/24p], fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p], fH: 56.25 kHz, fV: 50Hz [1080 (1125)/50p], fH: 15.63 kHz, fV: 50 Hz [576i (625i)], fH: 31.25 kHz,fV: 50 Hz [576p (625p)], fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p], fH: 33.75kHz, fV: 60 Hz [1080 (1125)/60i], fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p],fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF], fH: 67.50 kHz, fV: 60 Hz [1080(1125)/60p]
    - Video/S-Video: fH: 15.75 kHz, fV: 60 Hz[NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
  • Optical Axis Shift^:
    - Vertical: +60% from centerof screen (powered)
    - Horizontal: +/-10% from center of screen(powered)
    ^Optical axis shift function cannot be operated when used withthe ET-DLE055.
  • Keystone correction range: Vertical: ±40° (±30° withthe ET-DLE055/DLE080)
  • Installation: Ceiling/floor, front/rear
  • Terminals:
    - HDMI IN: HDMI 19-pin x1(compatible with HDCP)
    480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x480)-WUXGA (1,920 x 1,200)^^^, compatible with non-interlaced signals only,dot clock: 25-162 MHz
    - DVI-D IN: DVI-D 24-pin x1 (DVI 1.0 compliant,compatible with HDCP, compatible with single link only)
    480p, 576p,720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p,1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)^^^, compatible withnon-interlaced signals only, dot clock: 25 -162 MHz
    ^^^Compliant with VESAC VT-RB.
    - RGB 1 IN: BNC x5 (RGB/YPBPR/YCBCR x1)
    - RGB 2IN: D-Sub HD 15-pin (female) x1 (RGB/YPBPR/YCBCR x1)
    - VIDEOIN: BNC x1 (composite video)
    - S-VIDEO IN: Mini DIN 4-pin x1(S-Video)
    - SERIAL IN: D-sub 9-pin (female) x1 for external control(RS-232C compliant)
    - SERIAL OUT: D-sub 9-pin (male) x1 for linkcontrol (RS-232C compliant)
    - REMOTE 1 IN: M3 x1 for wired remotecontrol
    - REMOTE 1 OUT: M3 x1 for link control (for wired remotecontrol)
    - REMOTE 2 IN: D-sub 9-pin (female) x1 for external control(parallel)
    - LAN: RJ-45 x1 (for network connection,10Base-T/100Base-TX, compliant with PJLink™)
  • Cabinet materials: Molded plastic
  • Dimensions with supplied lens: 19-19/32" W x6-7/8" H*^ x 17-5/16" D (498 x 175*^ x 440 mm)
    *^With legs at shortestposition
    Weight with supplied lens*^^: Approximately 16 kg (35.3lbs)
    *^^Average value.  May differ depending on the actual unit.
  • Operating environment: Operating temperature:0-45 °C (32-113 °F)*^^^, operating humidity: 20-80 % (nocondensation)
    *^^^The operating temperature range is 0 °C to 40 °C (32 °Fto 104 °F) when the HIGH ALTITUDE MODE is set to ON (for altitudes from 1,400m to 2,700 m (4,593 ft to 8,858 ft) above sea level) . Also, if the ambienttemperature exceeds 40 °C (104 °F) (35 °C (95 °F) in HIGH ALTITUDE mode) whenthe projector is being used with LAMP SELECT set to DUAL and LAMP POWER set toNORMAL, the light output may be reduced approximately 20 % to protect theprojector.
  • Supplied accessories: Power cord, power cordsecure lock, wireless/wired remote control unit, batteries (R6/AA type x2),software CD-ROM (Logo Transfer Software, Multi Projector Monitoring &Control Software) (x1)

Notes on Use:

  • Do not install the projector in locations that aresubject to excessive water, humidity, steam, or oily smoke. Doing so mayresult in fire, malfunction, or electric shock.
  • The projector uses a high-voltage mercury lamp thatcontains high internal pressure. This lamp may break, emitting a large sound,or fail to illuminate, due to impact or extended use.
  • The projector uses a high-wattage lamp that becomesvery hot during operation. Please observe the following precautions:
    -Never place objects on top of the projector while it is inoperation.
    - Make sure there is an unobstructed space of 500 mm (1 ft8 in) or more around the projector’s intake and exhaust openings.
    - Donot stack projector units directly on top of one another for the purpose ofmultiple (stacked) projection. When stacking projector units, be sure toprovide the amount of space indicated between them. These space requirementsalso apply to installation where only one projector unit is operating at onetime and the other unit is used as a backup.
    - If the projector isplaced in a box or enclosure, the temperature of the air surrounding theprojector must be between 0 °C (32 °F) and 40 °C (104 °F). Also, make sure theprojector's intake and exhaust openings are not blocked. Take particular careto ensure that hot air from the exhaust openings is not sucked into the intakeopenings. Even when the ambient temperature near the intake opening is 40 °C(104 °F) or lower, an accumulation of hot air inside the cabinet may cause theprotective circuit to activate and shut down the projector. Please give ampleconsideration to the design with regard to ambient temperatureconditions.
  • If the projector is to be operated continuously 24hours a day / 7 days a week, use the dual-lamp optical system’s alternatinglamp operation (lamp changer) function. The projector cannot be operatedcontinuously 24 hours a day / 7 days a week in dual-lamp mode. Allow a minimumof two hours per week of non-operation time per lamp if using the dual-lampmode.
  • The lamp replacement cycle duration becomes shorter ifthe projector is operated repeatedly for short periods.
    - The length oftime that it takes for the lamp to break or fail to illuminate varies greatlydepending on individual lamp characteristics and usage conditions.
    - Thebrightness of the lamp will gradually decrease with use.
FROM OUR CUSTOMERS

HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Secured by Thawte

Full Compass is an Upfront Merchant on TheFind. Click for info.

Copyright © 2014 Full Compass Systems, LTD. All rights reserved.
Please read our Terms of Service, Privacy Policy and Conditions Statement.
We are not responsible for typographical errors in pricing or product specification inaccuracies in our catalog or web site. Prices are subject to change without notice.

Proud Member of:
Full Compass Systems, Ltd. BBB Business Review Logo: AES Logo: GSA Advantage Logo: National Association of Broadcasters Logo: NSCA Logo: Society of Broadcast Engineers
Logo: InfoCOMM Logo: NAMM
Full Compass is a national leader in Professional Audio, Professional Video, A/V, Lighting and Musical Instrument sales. Since 1977, our goal has been to provide the best possible value with exceptional customer service. We offer over 700 top equipment brands including, Shure, Yamaha, Panasonic, Sony, JBL, Sennheiser, Canon, QSC, Audio-Technica, Crown and much more. We also provide services such as computer systems integration, lighting design, and rentals (rentals available in Wisconsin only). Full Compass is an authorized service center and parts distributor for most of the major manufacturers we carry.