Kramer PT-572HDCP+ DVI over Twisted Pair Receiver

The Kramer PT-572HDCP+ is a twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT-572HDCP+ converts the twisted pair signal back to a DVI signal.

Features

• Max Data rate: 1365Gbps
• HDTV comptaible
• HDCP compliant
• System Range
  • Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded BC-DGKat524 cable.
  • Up to 90m (295ft) at SXGA, or up to 70m (230ft) at UXGA on shielded BC-DGKat623cable.
  • Up to 100m (330ft) at SXGA, or up to 80m (265ft) at UXGA on shielded BC-DGKat723 cable.
• Cable: Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 orBC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT5, CAT 6, and CAT 7 cables may not reach these ranges
• EDIDPassThru: Passes EDID/HDCP signals from source to display
• PowerConnect System: A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other
• Ultra-Compact PicoTOOLS: 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter

Specifications

• Inputs: 1 RJ-45 connector
• Outputs: 1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector, DDC signal 5Vpp (TTL).
• Bandwidth: Supports up to1.65Gbps
• Power Source: 12V DC, 250mA
• Dimensions: 2.4" x 2.1" x1"