Symetrix JUPITER 4
DSP Processor 4 Inputs x 4 Outputs

OUR PART #  JUPITER-4


Jupiter packages powerful DSP into a zero learning curve, turn-key audio processing solution drawing its inspiration from the ‘apps’ paradigm of smartphones like the iPhone. Standing on the shoulders of Symetrix’ world-class SymNet DSP platform, Jupiter upholds our commitment to pristine sound. Just like using productivity apps on your smart phone, you use Jupiter apps to do specific audio jobs with a simple download to Jupiter hardware.

The Jupiter-4 features 4 inputs and 4 outputs. All inputs are software selectable for line or mic with phantom power. External controller support includes Symetrix ARC wall panels, binary or analog control voltage inputs and logic outputs, and control over IP of all app parameters. Software and DSP processes are identical across the three hardware platforms. Jupiter’s precision low noise preamps make your mics sound warm and natural. A full +24 dBu output ensures the hottest levels for the path to your amps. Jupiter’s 110 dB dynamic range makes for an unusually low system noise floor. Multiple external control options provide greater end user accessibility. You can use Symetrix RS-485 ARC wall panels for volume control, source and preset selection. Third-party control over IP is quick to implement because Jupiter’s ASCII control protocol is humanly readable with short and simple commands. Logic inputs and outputs integrate with external control hardware like custom indicator panels, life safety systems and remote camera switchers.

Symetrix Jupter 4 Features:

  • Over 70 apps.  Categories include mixing and routing, public address / distribution, sound reinforcement, special purpose DSP.
  • Turn-key design.  Signal routings, be they simple or complex, are fully tested and ready to go right out of the box.
  • Controlled from the real world.  Control options include zero cost ARC-WEB browser based interface, low cost Symetrix ARC wall panels, and legacy third-party touch screens.
  • DSP + DSP + DSP.  An abundance of DSP resources power apps that are packed with features like dynamics, EQ, FIR filters, feedback fighters, loudspeaker management, automixing, and matrixing.
  • High feature to cost ratio.  Near zero programming time slashesinstallation costs.

Symetrix Jupter 4 Specifications:

  • Inputs
    • Number of Inputs: four (4) switchable balanced mic or line level
    • Connectors: 3.81 mm terminal blocks
    • Nominal Input Level: +4 dBu line or -36 dBu mic level (software selectable) with 20 dB of headroom
    • Mic Pre-amp Gain: +40 dB
    • Input Trim: +/- 24 dB
    • Maximum Input Level: +23 dBu
    • Input Impedance: > 18 kOhms balanced, > 9 kOhms unbalanced, > 2 kOhms with phantom power engaged
    • CMRR: > 50 dB @ 1 kHz, unity gain
    • Mic Pre-amp EIN: < -125 dBu, 22 Hz - 22 kHz, 100 Ohms source impedance
    • Phantom Power: +20 VDC, 20 mA maximum per input
  • Outputs
    • Number of Outputs: Four (4)
    • Connectors: 3.81 mm terminal blocks
    • Nominal Output Level: +4 dBu line level with 20 dB of headroom. For unbalanced analog output, do not connect the minus output terminal. Unbalanced configuration results in 6 dB lower output level
    • Maximum Output Level: +24 dBu
    • Output Impedance: 200 Ohms balanced, 100 Ohmsunbalanced
  • System
    • Sample Rate: 48 kHz
    • Frequency Response: 20 Hz - 20 kHz, +/- 0.5 dB
    • Dynamic Range: > 110 dB (A-Weighted), input to output
    • THD+Noise: < -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain
    • Interchannel Crosstalk: < -90 dB @ 1 kHz, typical
    • Latency: < 1.6 ms, input to output with all DSP inactive
  • SPACE REQUIRED:
    • 1U (WDH: 48.02 cm x 19.05 cm x 4.37 cm / 18.91 in x 7.5 in x 1.72 in), depth is specified from front panel  to back of connectors
    • Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections
    • ELECTRICAL:
    • 100-240 VAC, 50/60 Hz, 25 Watts maximum
    • Universal input
  • VENTILATION:
    • Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
  • CERTIFICATIONS OR COMPLIANCE:
    • UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS
Symetrix shows us their Jupiter Series Digital Signal Processors.

Jupiter packages powerful DSP into a zero learning curve, turn-key audio processing solution drawing its inspiration from the ‘apps’ paradigm of smartphones like the iPhone. Standing on the shoulders of Symetrix’ world-class SymNet DSP platform, Jupiter upholds our commitment to pristine sound. Just like using productivity apps on your smart phone, you use Jupiter apps to do specific audio jobs with a simple download to Jupiter hardware. Available in the Jupiter 12, 8 and 4.

 

Products for this GearCast





Our Price:$1,869.00
Inbound. Ships out: 3-5 business days

Free Shipping Available

 

© 2014 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.