Lightronics XC62-UB 6-Channel Portable Dimmer with DMX and UL-508 Compliant

The XC-62 dimming system has 6 circuits with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fast acting fuse. An allowance of 200% overhead capacity is employed in the triac circuit design, 25 Amps per circuit, and an overhead of up to 400 Volts per circuit. The dimming system has a rise time of not less then 350 microseconds. A user may set dimmer attributes of Dim or Relay, unit address, and stand alone chase functions via menus. The dimming system uses the USITT standard DMX-512 protocol, on a 5 pin XLR type connector for direct control of the dimming circuits. The microcontroller directly applies pulse width modulation to channel output drive opto-couplers without the need for any analog circuitry. The opto-couplers provide 5000 Volt isolation between the high voltage and all other circuitry.

Lightronics XC-62-UB Portable Dimmer Features:

• UL-508 Compliant - 12 Amp Mains Circuit Breaker, 1440 Watts TotalPower - PENDING
• LED Digital Display
• 6 Channels
• 1200W per Channel
• Softpatch (each dimmer)
• Dimmer Limiting
• Dimmer Curve Selection
• Architectural Interface
• AMX/Crestron Interface
• DMX-512 Protocol
• 8 Built in Chases
• Relay Mode Switchable
• Fuses
• Edison Outputs
• 120V

Lightronics XC-62-UB Portable Dimmer Specifications:

• Channels: 6
• Channel Capacity: 1200 Watts per Channel
• Total Power: 4800 Watts
• Control Protocol: DMX-512, RS-485, Architectural, Optional Wireless DMX
• Control Connections: Dual 5 Pin XLR
• Power Requirements: 120VAC, Two 20 Amp Circuits
• Power Input: Two Edison Plugs
• Frequency: 50 or 60Hz
• Fusing: 10 Amp each Channel
• Preheat Voltage: Soft Start Control
• Response Curve: Incandescent Bulbs, LED, Fluorescent, Relay Mode
• Filter Rise Time: 350 Microseconds
• Filter Max. Rate of Rise: 105 Milliamps / Microsecond
• Full Load Voltage Drop: 3 Volts
• Efficiency: 97%
• Size: 16”L x 7”W x 2 5/8”D
• Weight: 9 Pounds