M-Audio SBX10
240 W 10" Active Subwoofer

SBX10

The M-Audio® SBX10 active subwoofer delivers tight, clean bass response down to 20Hz—revealing the extreme low frequencies in your music so you can make accurate mixing decisions.  Comprising a 10" fiberglass/paper composite driver, a 240-watt all-discrete internal amplifier, and a variable 50-200Hz crossover, the SBX10 subwoofer is ideal for studios where space is tight.  An oversized magnet, high-temperature voice coil, high-density cabinet and a full complement of inputs are just some of the SBX10's additional components.  The unit includes a bypass footswitch so you can judge how mixes will sound with and without a dedicated subwoofer.

Features:

• Flared rear bass-reflex port provides high efficiency, minimal air turbulence
• When paired with either the M-Audio CX or BX Deluxe studio monitors, the SBX10 becomes part of an integrated system that provides accurate monitoring for the entire 20Hz to 20kHz spectrum.  When the CX5 and BX5a Deluxe studio monitors are used in tandem with the SBX10, the system can reproduce full-range signals at higher levels without stressing the components.
• The SBX10 accepts the two-channel stereo outputs from your mixer, audio interface or sound card, and your main monitors connect to the subwoofer's outputs.  The internal crossover network of the SBX10 splits the signal at a user-defined crossover frequency (50-200Hz), routing everything below it to the internal sub and everything above it to the main speakers.  This improves fidelity because the components aren't tripping over each other to reproduce the same frequency, and each only has to deliver frequencies to which it is ideally suited.  The variable crossover makes it possible to tailor the bass response in your monitoring environment in order to achieve the most accurate acoustic response.
• The SBX10 carries 240 watts of discrete Class A/B power for tons of headroom.  The 10" driver features an oversized magnet and a high-temperature, long-throw voice coil, delivering maximum low frequency output and optimized power handling.  The cabinet is made of 3/4" vinyl-clad MDF with 1" front and back baffles, internal bracing and a flared rear bass-reflex port to minimize turbulence and improve low frequency efficiency.  The fiberglass/paper composite driver provides exceptionally accurate bass response, resulting in a clean and refined low-frequency extension that minimizes listener fatigue.
• The SBX10 includes a subwoofer bypass function that removes the subwoofer amp, speaker, and crossover from the signal path, sending the full-bandwidth program to your direct-field monitors.  By plugging in the included footswitch, you can control this function dynamically as you're playing back your material.

Our Part #  SBX10