Audio Technologies Inc. DDA-106XLR
Distribution Amp, Digital, 1x6, XLR, AES/EBU

DDA-106XLR

ATI's Series 2 Digital Audio Distribution Amplifiers give you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Switchable inputs let you choose from multiple input streams. Selectable reclocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your audio is clean or let you know why it's not. Push-button input EQ optimizes for long input cables. Loop-thru connectors let you stack units for even more outputs or seamlessly insert a DA into your digital workflow.

Features

• Sample rates from 27 to 192kHz
• Word Lengths from 16 to 24 bit
• Lowest jitter, <300 picoseconds
• Propegation delay <25 nanoseconds
• Selectable Re-clocking, Surround capable
• Loop-thru inputs with switched termination
• Input sample rate indicators
• Input word length indicators
• Fault diagnostic indicators
• Pro/Consumer Mode indicator
• Automatic Input EQ for long line lengths
• Front Panel Lockout

Input

• Connectors: XLR female; paralleled input connectorsfor loop-thru expansion
• Level: 0.2Vp-p minimum
• Impedance: Transformer isolated, balanced andfloating, 110 ohms; terminating resistors may be switched in or out via frontpanel control
• Sampling Frequency: 27 to 192kHz
• Cable Length: >1000 feet of 110 ohm cable withequalizer; 75 ohm coax allows longer runs
• Equalizer: Automatic EQ for long lines via frontpanel push button
• Clock: Regenerated from input signal with dual mode PLL or non-relocked topreserve Surround coding; switchable

Outputs

• Connectors: 6 XLR male
• Level: 4Vp-p loaded
• Impedance: 110 ohms, balanced and transformerisolated
• Output Jitter: <0.3 nanoseconds peak to peak
• Propagation Delay: <25 nanoseconds

Indicators

• Input Termination: On, Off
• Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4, and192 kHz
• Input Word Length: 16, 18, 20 and 24 bits
• Input Digital Errors: Bi-Phase/Parity, Validity,Non-Linear PCM, DTS-CD Signal
• Re-Clocking: Off, On
• Mode: Pro, Consumer
• Input Cable EQ: Locked, Enabled
• Input Select: 1, 2
• Power: LED follows power transformer and full wave bridge

Specifications

• Power: Internal Supply, 115/230 VAC (selectable viainternal jumper) +/-10%, 50/60Hz, 10VA, IEC320 3 pin connector
• Size (W x H x D): 19" x 1.75" x 8.5"; 1RU package
• Weight: 7 lbs net; 9 lbs shipping
• Warranty: Limited, one year warranty

Our Part #  DDA-106XLR