Listen Technologies LPT-R4
Room Module (Communicates with up to 4 Mics, No Power Amp)

LPT-R4

The R4 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone via infrared light and provide audio to an existing sound system. It connects to the Control Unit with one (1) Cat-5e cable reducing cable clutter. The paintable surface (except the sensor lens) snaps into a supplied mounting platform and has a cable cover that hides the cables. The RM has a built in IR sensor/emitter that bi-directionally communicates with up to four (4) microphones. This unique feature auto-registers any microphone within the room for simple operation. Two (2) additional sensors may be added to the RM. The RM has a paging input and a general purpose interface for controlling or accepting control to/from other devices.

Features:

• Single point of contact for ceiling or wall speakers, expansion sensors,paging input and general purpose interface. R2 and R4 used to connect toexisting sound systems.
• Connects to the Control Unit via Cat-5e cable, making installation simpleby eliminating cable clutter.
• Bi-directional communication between microphone and room module providesexcellent performance, coverage, features and reliability.
• Microphones auto-register to the room module, makingoperation simple.
• Includes mounting platform for wallboard and drop ceilings and can bemounted directly to electrical boxes.

Includes:

• ListenPoint Room Module
• Mounting Platform
• Mounting Hardware
• Euro Connectors

Specifications:

• Paging Input: One (1) 2-pin Euro Connector, 8 ohm, 25volt, 70 volt -internally selectable
• 6-12 VDC Input: One (1) 2-pin Euro Connector, 600Ohms
• Relay Output: One (1) 3-pin Euro Connector, Latching or Pulse Relay -programmed via software
• Room EQ: Five (5) band parametric, Two (2) tone controls
• Infrared Emitter 38 kHz uplink
• Infrared Sensor 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz
• External Infrared Sensor: Two (2) phono connectors provided
• Rear Panel: Two (2) Cat-5e w/ LED indicator connectors, two (2) phonoconnectors
• Supplied via Control Unit: 19 VDC, 60 Watts via Cat-5e cable
• Room Module Dimensions: 2.1" H x 8.5" W x6.9" D (5.4 x 20.4x 17.5 cm)
• Room Dimensions: 1.3" H x 2.4" W x4.8" D (34 x 60 x 122 cm)
• Room Module Mounting: Mounting platform provided, mounts to mostelectrical boxes
• Cable Cover Mounting: Mounts to mounting platform
• Room Module Weight: 1.75 lbs. (.8 kg)
• Shipping Weight: 3.0 lbs. (1.36 kg)
• Room Module Compliance: CE, ROHS, FCC, Industry Canada
• Power Supply Compliance: UL, CE, ROHS, FCC, Industry Canada

Our Part #  LPT-R4