Listen Technologies LPT-R14
60W Room Module (Communicates with up to 4 Mics, with Built-In Power Amp)

LPT-R14

The R14 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the M1 microphone via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall.  It connects to Control Unit with one (1) Cat-5e cable reducing cable clutter.  The paintable surface (except the sensor lens) snaps into a supplied mounting platform and has a cable cover that hides the cables.  The RM has a built in IR sensor/emitter that bi-directionally communicates with up to four (4) microphones.  This unique feature auto-registers any microphone within the room for simple operation.  Two (2) additional sensors may be added to the RM.  The RM has a paging input and a general purpose interface for controlling or accepting control to/from other devices.

Features:

• Single point of contact for ceiling or wall speakers, expansion sensors,paging input and general purpose interface. R2 and R4 used to connect toexisting sound systems.
• Connects to the Control Unit via Cat-5e cable, making installation simpleby eliminating cable clutter.
• Bi-directional communication between microphone and room module providesexcellent performance, coverage, features and reliability.
• Microphones auto-register to the room module, making operation simple.
• Advanced Quickfilter® provides 512 points of equalization for precisetuning of pre loaded speaker models.
• Seven band DSP based equalizer – two tone controls and five fullyparametric filters.
• Includes mounting platform for wallboard and drop ceilings and can bemounted directly to electrical boxes.

Includes:

• ListenPoint Room Module
• Mounting Platform
• Mounting Hardware
• Euro Connectors

Specifications:

• Speaker Output: Four (4) amplifier channels w/ 2-pin euro connectors
• Paging Input: One (1) 2-pin Euro Connector, 8 ohm, 25 volt, 70 volt -internally selectable
• 6-12 VDC Input: One (1) 2-pin Euro Connector, 600 Ohms
• Relay Output: One (1) 3-pin Euro Connector, Latching or Pulse Relay -programmed via software
• Microphone to Speaker Frequency: 100 Hz to 10 kHz, +/- 3 dB, < 2.0%THD, >60 dB SNR
• Unbalanced Input to Speaker Frequency Response: 20 Hz to 20 kHz, +/- 3 dB,< 0.1% THD, >80 dB SNR
• Speaker EQ: Quickfilter®, 512 points of equalization by speaker model
• Room EQ: Five (5) band parametric, Two (2) tone controls
• Infrared Emitter 38 kHz uplink
• Infrared Sensor 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz
• External Infrared Sensor: Two (2) phono connectors provided
• Rear Panel: Four (4) 2-pin euro connectors, two (2) Cat-5e w/ LEDindicator connectors, two (2) phono connectors
• Supplied via Control Unit: 19 VDC, 60 Watts via Cat-5e cable
• Room Module Dimensions: 2.1" H x 8.5" W x 6.9" D (5.4 x20.4 x 17.5 cm)
• Room Module w/ Mounting Platform: 2.5" H x 8.5" W x 9.8"D (6.3 x 20.4 x 24.9 cm)
• Power Supply Dimensions: 1.3" H x 2.4" W x 4.8" D (34 x 60x 122 cm)
• Room Module Mounting: Mounting platform provided, mounts to mostelectrical boxes
• Cable Cover Mounting: Mounts to mounting platform
• Room Module Weight: 1.75 lbs. (.8 kg)
• Shipping Weight: 3.0 lbs. (1.36 kg)
• Room Module Compliance: CE, ROHS,FCC, Industry Canada
• Power Supply Compliance: UL,CE, ROHS,FCC, Industry Canada

Our Part #  LPT-R14