JBL CONTROL-50S/T-WH
150W 8" Subwoofer (for use with Control 52 Satellite Speakers, White)

CONTROL-50S/T-WH

JBL's 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8") driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5") 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

Features:

• Stylish, unobtrusive design fits into a wide variety of decors
• High fidelity sound
• Selectable 70V/100V for distributed lines, or low impedance
• Versatility for either two or four satellite speakers per system
• Ability to mix and match with Control Contractor40 Series inceiling models
• Wall-mount brackets included

Specifications:

• Frequency Range (-10 dB): 32 Hz – 200 Hz
• Frequency Response (±3 dB): 50 Hz – 150 Hz
• Power Capacity:
  - 300 Watts Continuous Program Power (2 hrs)
  - 150 Watts Continuous Pink Noise (2 hrs)
  - 200 Watts Continuous Program Power (100 hrs)
  - 100 Watts Continuous Pink Noise (100 hrs)
• Nominal Sensitivity (2.83V, 1m): 95 dB (near corner), 89 dB (center of wall)
• Rated Maximum SPL (1m):
  - 115 dB average, 121 dB peak (near corner)
  - 109 dB average, 115 dB peak (center of wall)
• Nominal Impedance: 8 ohms (in bypass/thru mode)
• Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
• Transducer Driver: 200 mm (8") with polypropylene cone, butyl rubber surround, 38 mm (1.5") 4-layer copper-clad coil, vented aluminum former
• Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Material: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
• Cabinet Dimensions: 14.0" H x 15.4" W x 8.0" D (356 x 391 x 203 mm)
• Wall Bracket Dimensions: 0.6" D (15 mm)
• Wall Bracket: 0.9" (2.3 mm) thick zinc-plated and painted cold-rolled steel
• Net Weight: 20 lbs. (9.0 kg)
• Shipping Weight: 23 lbs. (10.2 kg)
• Included Accessories: Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

NOTE: Shown above in black, comes in white.

Our Part #  CONTROL-50S/T-WH