ADAM Audio S4X-H
Studio Monitor, Active 3-Way, Horizontal, 2x250W LF / 250W MF / 50W HF, (each)

S4X-H

There are two versions of the S4X, a horizontal and a vertical version. Both of them are equipped with ADAM's unique transducers, newly designed amplifiers, and a highly sophisticated control panel. The S4X monitors have been designed for medium size control rooms. Given their excessive power, the S4X are also capable of working in larger environments. Because both S4X models have identical tweeters and midrange drivers handling frequencies above 350 Hz, any combination of either model will integrate perfectly in a 5.1 or 7.1 installation.

The X-ART tweeter sets a new benchmark in tweeter technology. For this, ADAM Audio has specifically designed a new A/B power amplifier that has an ultra low distortion and an immense internal bandwidth of more than 1MHz. In combination with the X-ART tweeter, this guarantees an ultra fine resolution and perfect transparency.
New HexaCone™-midranges and woofers handle both the mid and low frequencies. With their larger voice coils and stronger magnets they have longer linear excursion for higher SPLs without sacrificing detail and musicality.

The S4X-H midfield monitor combines the X-ART tweeter with ADAM Audios unique A/B amplifier. The speaker also features a 5“ HexaCone™-midrange and two redeveloped 9“ HexaCone™-woofers. Each of the woofers and midrange drivers are driven by a 250 W ICE module.

The front panel

Six controls can be found on the new front panel. Input sensitivity is handled by two controls. One control allows for coarse settings (-20dB to +8dB), while the second is used for fine tuning in 0.5dB steps, ranging from -1.5dB to 2dB.
There are two controls for the lower frequencies. One is an equalizer at 80 Hz that boosts bass response sometimes desirable in popular music. The second is a shelf filter that allows the engineer to alter the frequencies below 150 Hz.
High frequencies can also be adjusted by two different controls. The first alters the high frequency volume (-2dB to +2dB), while the second is a shelf filter for frequencies above 6 kHz. Both the high and low shelf filters can raise or lower ±4 dB progressively within their frequency band.

Technical Data S4X-H

• Active bass reflex speaker
  Woofer  2x 228mm (9”) HexaCone®
  Midrange  157mm (6") HexaCone®
  Tweeter  X-ART
• Freq.response
  (± 3 dB)
   28Hz - 50kHz
• Panel  Input/HF gain, Hi/Lo EQ
• Built-in amplifiers  Woofer: 2x 250W* / 350W**
  Midrange: 250W* / 350W**
  Tweeter: 50W* / 100W**
• Inputs  Analog: Balanced XLR
  Digital (opt.): AES/EBU + SPDIF
• H x W x D  360mm x 700mm x 450mm
  (14.4” x 28” x 18”)
• Weight  32,2 kg (70 lbs)
• Warranty  5 years

* =  long term IEC 265-8-Wrms /10 min

**= nominal IEC 265-8 = Peak Power 5 m sec

Our Part #  S4X-H