Audient ASP008-ADAT96

The ASP008 is a compact, 1U rack mount unit featuring eight ultra high quality mic preamplifiers developed from the renowned mic-pre design used in the acclaimed ASP8024 recording console.

The design uses an 8 transistor discrete Class A front end with extended band-width and a noise floor close to the theoretical Johnson limit. Carefully chosen close tolerance components are used to achieve high CMRR at all gain settings and distortion is minimized to less than 0.001% at 20dB gain and +10dBu output. This outstanding technical performance delivers a mic amp with incredible transparency and detail without coloration or other unwanted artifacts.

Each mic amp also features switchable input impedance, allowing the user to explore the subtle variations in microphone character that are determined by output termination.

All channels include an XLR input, 'soft start' 48V phantom power, switchable input impedance, 25-250Hz hi-pass filter as well as line input selection. Channels 1 and 2 also feature a -20dB attenuator and a high-impedance Instrument/DI input on a front panel mounted jack. LEDs provide indication of signal present and overload.

Two digital output option cards are available - one with ADAT optical interface, the other with AES/EBU and ADAT. Both cards now support sample rates of up to 96kHz over ADAT S/MUX.

Features

• Discrete Class A front end
• Switchable input impedance
• Two instrument inputs
• Variable Hi-Pass filter on all inputs
• Line level input on all channels
• Phase invert on all channels
• Signal status indication
• Optional ADAT, AES/EBU and S/PDIF outputs with selectable Sample rate andDither

Controls

• 48V: Phantom Power ON/OFF with 'soft start' feature toavoid thumps
• INST/DI: CH 1&2 only. Selects jack instrumentinput with input impedance >1M ohm
• -20dB: 20dB Pad (CH1 & 2 only)
• LINE: Selects Line level input with input impedance of10k ohm
• Polarity Invert
• 12dB/Octave hi-pass filter - range 25Hz-250Hz
• PK: Indicates signal levels within 4dB of clipping
• SIG: Indicates signal levels above -25dBu
• I/P Z: Input impedance select 200/1200/5000 ohms
• GAIN: MIC/DI 0 to 60dB. LINE -20 to 40dB
• Sample Rate: Selectable 44.1/48/88.2/96 kHz
• Dither: Selectable 16/20/24 bit

Interfaces

• MIC Input: Electronically balanced XLR with variableinput impedance
• LINE Input: Electronically balanced 25 pin D wired toDA88 standard
• INST/DI Input: Unbalanced front panel mounted jack
• LINE Output: Electronically balanced 25 pin D wired toDA88 standard
• Digital Output: Optional 48/96kHz AES, S/PDIF and48kHz ADAT light-pipe
• Ext Word Clock: BNC

Performance

• Maximum Input/Output Level: +21.5 dBu
• THD: Typically better than 0.007% at 1kHz any gainsetting
• EIN: Better than -127.5dB @ 60dB gain/ref 150 ohms
• Frequency Response: -0.3dB @ 10Hz to -3dB @ 300kHz atunity gain
• CMRR: Better than 75dB at 1kHz and 60dB gain
• Dimensions: 19" x 11" x 1.75"
• Weight: 9.92 lbs
• Power Consumption: 40 watts

TMGR# ASP008-ADAT96