Ideal 33-982
Signaltek-FO (with 2 1300nm SFP Modules)

33-982

SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification. 

Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.

SIGNALTEK-FO's Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

In addition to cable performance qualification, SIGNALTEK™ can be configured to run for several minutes or hours at a time.  While stress testing critical network links, SIGNALTEK™ transmits hundreds of Gigabits of information across the network while looking for dropped packets.  This monitoring mode allows SIGNALTEK™ to be used to isolate intermittent network problems that are difficult to detect.  Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.

Includes:

• 1 SIGNALTEK fiber ready near-end and 1 remote-end handset
• Carrying case
• Copper cable accessory kit with interfaces to RJ45, RJ11,
• Coax F-Type cables, and alligator clips
• Fiber optic cable accessory kit: 2 duplex LC-SC 50/125 µm (2m/7 ft.) cables, 2 duplex LC-SC 62.5/125 µm (2m/7 ft.)cables, 1 duplex SC-SC adapter.
• 8 AA alkaline batteries
• 2 AC power adapters with international plugs
• USB interface cable
• 1 CD-ROM User Manual
• 1 Training DVD

Features/Capabilities:

• Fiber Optic & Copper Gigabit Qualification - Qualify copper and fiber-optic cabling to IEEE 802.3 standards
• Multimedia Gigabit Qualifications (Multimode & Single Mode capability) - Qualify short and long range cabling to a distance of up to 10km (Multimode and Single Mode capability)
• BERT & Optical Attenuation Measurements - Perform Bit Error Rate Testing (BERT) and decibel (dB) loss measurements of optical links
• Dual Wavelength Capability - Available in both 850nm and 1300 mn wavelengths to support virtually all LAN and campus fiber applications
• Small Form factor Pluggable (SFP) modules are compact, light-weight, and field changeable
• Storage & Reporting for Thousands of Reports - Store and print Qualification reports for copper and fiber jobs using internal memory or USB "thumb-drives"

Specifications:

• Ports/Connections:
  - USB A/B, DC power input
  - Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
  - Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet
• SFP-13X0 – 1300nm Module:
  - Class 1 Laser EN60825-1
  - Compatible fiber types: 50/125 µm or 62.5/125 µm graded index multimode fiber & 9/123mm step index singme-mode fiber
  - Power Output (dBm): -9min, -2.5max
  - Receiver Power Range (dBm): 0 to -22
  - Max Link Length: 550m (1800 ft.) on 50/125 µm fiber; 300m (985 ft.) on 62.5/125 µm fiber; 10km (6.2mi.) on 9/125 µm fiber
  - Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing
• Length Measurement:
  - RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460 ft.
  - SFP Port: No length measurement of fiber optic cables
• Bert Error Rate Measurements:
  - Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
  - Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.
• Battery Life: Standard AA Alkaline Batteries
  - Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
  - Fiber Testing: Recommend use of AC adapters when testing fiber

Our Part #  33-982