Lab Gruppen PLM14000/BP
2x22550W 8 Ohm Binding Post Power Amplifier

PLM14000/BP

Lab.Gruppen's PLM14000BP extends the PLM Series with a two-input, two-output power platform optimized for high-power requirements, making it ideal for demanding subwoofer and low-end applications with loading down to 2 ohms.  Beyond amplification, the PLM14000BP seamlessly integrates networked audio distribution, drive processing, and load verification with real-time performance monitoring into a single hardware unit plus unified software controller.  As a cohesive system, the PLM14000BP affords significant advantages when compared to conventional approaches utilizing separate components.

Features:

• 7000 W per channel @ 2 ohms*
• 4350 W per channel @ 4 ohms*
  * More power available when driven asymmetrically.
• 2U chassis weighing only 13.5 kg (30 lbs)
• Class TD® output stage
• Regulated Switch Mode Power Supply (R.SMPS™)
• Copper-finned Intercooler® with transverse-mounted output devices
• Full suite of protection and fault monitoring features
• Comprehensive loudspeaker preset database
• LoadLibrary™ load “Fingerprint” (identity and characteristics) data
• Comprehensive LoadSmart™ load verification and SpeakerSafe™ continuous loudspeaker performance monitoring
• Dante™ low-latency digital network included as standard
• Fully compatible with Dolby Lake Processor, Lake Contour™,and Lake Mesa Quad EQ™ and Mesa Parametic EQ™ devices
• Primary and secondary network connections (for daisy chaining or system redundancy)
• Digitally controlled ”amplifier gain” adjustable in 0.1 dB steps from 22 to 44 dB
• Digital output attenuation in 0.25 dB steps from -inf to 0 dB
• Dual Binding post (4) or Neutrik® Speakon® (2 x NLT4) power output connectors
• Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL™) adjustable in 0.1 V steps from 17.8 to 193 V
• Power Average Limiter (PAL)
• Moisture-resistant silicone touchpad for front-panel display mode selection and menu navigation
• Raised Cosine Equalization™
• Linear phase and classical crossovers
• LimiterMax™ – peak and RMS limiters
• Iso-Float™ ground isolation
• Super Module capability
• Integration of third party frequency measurement and analysis system via the Lake Analyzer Bridge
• Analog and AES digital inputs with loop-thru outputs
• Auto-select input router for all inputs with user definable priorities

Specifications:

• Number of input channels: 2
• Number of output channels: 2
• Peak total output all channels driven: 14000 W
• Max. Peak output voltage per channel: 193 V
• Max. output current per channel: 90 A peak
• Dimensions including handles and rear support: 19" W x 18.5" D x 2 RU H (W/H/D) (483 x 470 x 88 mm)
• Weight: 30 lbs. (13.5 kg)
• Finish: Black painted steel chassis with black painted steel/aluminum front
• Approvals: CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

Max. Output Power: SEE THIRD PICTURE @ TOP FOR INFO.

Audio Performance Specifications:

• THD + N 20 Hz - 20 kHz for 1 W: <0.05%
• THD + N at 1 kHz and 1 dB below clipping: <0.04%
• Dynamic range with digital inputs (for all supported sample rates): >114 dB
• Dynamic range with analog inputs: >112 dB
• Frequency response (1 W into 8 ohms, 20 Hz - 20 kHz): + /-0.05 dB
• Input Common Mode Rejection (CMR) 20 Hz to 1 khz: >78 dB
• Internal sample rate: 96 k
• Internal data path: 32 bit floating point
• Product propagation delay, best case (96 kHz AES): 1.61 ms
• Product propagation delay, analog input: 1.68 ms

Sample Rate Converters:

• THD + Noise: 0.00003 %, 20 Hz - 20 kHz, unweighted

Analog to Digital Inputs:

• THD + Noise:
  0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
  0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting

AES / EBU Inputs:

• Supported resolutions: =24 bit
• Supported sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Dante Audio Network:

• Supports redundant paths: Yes
• Flexible topology: Yes
• Network latency: 0.8, 1.3 and 4 ms

Device Presets:

• Local memory locations for the settings of the product: 100

Limiters:

• Adjustable Inter-Sample Voltage Peak Limiter (ISVPL): 17.8 - 193 V, step size 0.1 V
• Current Peak Limiter < 300 ms: 90 A peak
• Current Average Limiter (CAL) > 300 ms: 44 Arms
• LimiterMax (rms and peak limiters):
  – MaxRMS (rms voltage limiter): Yes
  – MaxPeak (peak voltage limiter): Yes

Gain:

• Amplifier gain: 22 - 44 dB, step size 0.1 dB
• Analog attenuator: -Inf to 0 dB, step size 0.25 dB

Back panel interface:

• AES / EBU / I/O (input + link): 2 x 3-pin XLR
• Analog, 2-channel I/O (input + link): 4 x 3-pin XLR, electronically balanced
• Output connectors: Neutrik Speakon (2 x NLT4) or 4 Binding Posts (pairs) (must be specified upon order)
• Auto 10/100, Auto Uplink: 2 x RJ45 EtherCon Auto 10/100, Auto Uplink
• Control and monitoring interface: Via Ethernet for Lake Controller software
• Detachable mains cord: Neutrik PowerCon 32 A
• Cooling: Two fans, front-to-rear airflow, temperature controlled speed

Front-panel user interface:

• Display, daylight readable LCD: 2.5"
• Fault/Warning/Limit/Clip indicators: RGB LEDs
• Mute and soft function buttons: 8 provided
• Standby Power button: On/Off
• Mute Enable button: Enables muting of outputs and inputs via soft-button keypad
• Meter button: Toggles through meter views
• Menu button: Provides a menu driven interface for full function front panel control
• Rotary Encoder: Yes
• Exit button: Provides a "back" function

Power:

• Operating voltage, 230 V / 115 V nominal* 140-265 V / 70-135 V (45 - 66 Hz)
  *Separate 230 V or 115 V versions available. Not selectable on the product.
• Soft start / Inrush Current Draw: Yes / max. 5 A
• Mains Power Average Limiter (PAL): Yes

NOTE: Re: Assymetrically loading the output channels: If one channel has reduced output power requirements, the voltage drop from the power supply will be reduced, resulting in a higher voltage and power output for the other channel.

Our Part #  PLM14000/BP