Community M12R-BI
Stage Monitor, 12" 2-Way, Horn Right of LF Driver, Installation Version w/4 x M10 Hang Points & Mounting Bracket, Black

M12R-BI

The M12 stage monitor system is a high style, no-compromise solution to the demands of high performance monitoring. At 10.5" high, the M12 offers clean sightlines for the audience and the camera. The rugged multilayer glass composite construction, "Texas Boot-proof" stainless steel grille and an abrasion resistant non-reflective finish make the M12 an excellent choice for TV broadcasts and stage productions. The dual NL4 connectors are tucked safely away in a pocket beneath the M12. Specially molded channels and cable clips allow the user to bring the speaker cables out of the back or either side of the monitor. These exits also allow easy positioning of the monitor. The M12 contains a high-powered 12" woofer and a 2" exit B&C wide band high frequency driver. The high frequency driver is mounted to a molded one-piece asymmetrical horn with a 90-degree pattern at the top and 40 degree at the bottom, allowing full-range monitor output close up or at a distance.

Applications

• Televixed live events, live stage and small theatre events
• Corporate events, conference rooms
• Houses of worship
• Overhead fill speaker
• Auditoria, lecture halls, underbalcony
• Wall and ceiling mount applications for any room with a relatively low ceiling

Features

• Low profile, high style exterior with small footprint
• Multilayer glass composite construction
• Non-reflective black or white exterior with matching heavy-duty non-reflective grille
• Ergonomic rubber pocket grip handles on portable models
• High powered 12" woofer
• 2" wide-band compression driver on an asymmetrical horn
• Switchable bi-amp/passive configuration with well protected dual NL4 connectors
• Available in mirror right or left horn configurations
• Optional installation models available with M10 hang points and wall/ceiling mount included
• Five-Year warranty

Specifications

• Loudspeaker Type: Two-way, full-range, bass ported stage monitor
• Operating Range:
  55Hz-18kHz
  80Hz-16kHz (+/-2dB)
• Nominal -6dB Beamwidth: 40-90° H x 70° V
• Axial Q/DI: 7.1/8.5, 1.5kHz to 12.5kHz
• Recommended Signal Processing: 60Hz high pass filter
• Drivers:
  LF 1 x 12" Ferrofluid-cooled
  HF 1 x 2" exit B&C DE85
• Driver Protection: None
• Input Connection: (2) Neutrik NL4MP
• Controls: Bi-Amp/Passive Switch
• Enclosure: Multilayer glass composite
• Grille: 18-gauge perforated steel
• Required Accessories: DSP for bi-amp operation
• Supplied Accessories: None
• Optional Accessories:
  M12-RDCASE2 roadcase for two M12 monitors
  M12-RDCASE4 roadcase for four M12 monitors
• Dimensions (H x W x D): 10.5" x 21.5" x 20.75"
• Weight: 56 lbs
• Shipping Weight: 73 lbs

Passive Mode Specifications

• Max Input (Passive): 300W continuous, 750W program
  49 volts RMS, 110 volts momentary peak
• Recommended Power Amplifier: 630W to 900W @ 8 ohms
• Sensitivity (1W/1m):
  97 dB SPL (100Hz to 16kHz 1/3 octave bands)
  98 dB SPL (250Hz to 4kHz speech range)
• Maximum Output: 122dB SPL/129dB SPL (peak)
• Nominal Impedance: 8 ohms
• Minimum Impedance: 5.3 ohms @ 1.9kHz

Bi-Amp Mode Specifications

• Max Input (Bi-Amp):
  LF - same as for passive mode
  HF - 80W continuous, 160W program, 25 volts RMS, 51 volts momentary peak
• Recommended Power Amplifier:
  LF - same as for passive mode
  HF - 130W to 190W @ 8 ohms
• Sensitivity (1W/1m)
  LF - 99 dB SPL (100 Hz to 1600 Hz 1/3 octave bands)
  HF - 106 dB SPL (2kHz TO 16kHz 1/3 octave bands)
• Maximum Output: 124 dB SPL/131 dB SPL (peak)
• Nominal Impedances
  LF - 8 ohms
  HF - 8 ohms
• Crossover Frequency: 1.5kHz
• Recommended Signal Processing (bi-amp): 60Hz high pass filter

Our Part #  M12R-BI