Australian Monitor AMIS120P
Power Amp, 120 Watt, Outputs for 4 & 8 ohms, 70V & 100V Line

AMIS120P

The AMIS120P is a 120 watt power amplifier with outputs for 4 and 8 ohms, 70 and 100 volt line. It may be desk or rack mounted. The AMIS120P features a flat screwdriver accessible gain control on the rear panel. This amplifier features a status LED. The amplifier may operate from mains power or 24V DC.

Inputs and Outputs
The AMIS120P features a balanced line level XRL input with a parallel output to feed additional power amplifiers. The unit has industry standard 3 pin XLR microphone sockets. The AMIS120P features 100 volt, 70 volt, 8 and 4 ohm isolated transformer outputs via a rear panel barrier strip.

Protection
Internal current limiting protects the amplifier from both overload and overdrive conditions. Should the amplifier be overdriven, a current limiter will protect the unit, and in a worst case scenario the amplifier will shut down until the problem is resolved. Once the problem is fixed (shorted speaker line, or overdriven input), the amplifier will automatically reset and continue operation. The AMIS120P features generous heatsinking.

Features

• Balanced XLR line level input with parallel output
• Signal Present LED
• Rear panel level control
• Temperature Sensing Fan Cooling
• Current limiting protection
• 100V, 70V, 4 and 8 ohm outputs
• 2RU
• 240VAC/24VDC operation

Specifications

• Power Output: 120 Watts RMS
• Maximum Load: 80 ohms @ 100 volts
• Power Bandwidth: 60Hz-15kHz <0.5% THD
• Frequency Response: 60Hz-15kHZ (+/-3dB)
• Total Harmonic Distortion: 0.5% @ 1kHz rated power
• Signal To Noise Ratio: -80dB
• Input Sensitivity: 700 mV
• Outputs: 100V, 70V, 4 ohm, 8 ohm
• Controls: One gain control on rear of the unit via flathead screwdriver control
• Indicators: Power "on" LED
• Power Source: AC 230/240V - 50Hz; DC 24V; 110V - 60Hz (special) 3 pin IEC connector
• Power Consumption: 300 watts
• Protection: Current Limiter protection, plus AC and DC fuses
• Dimensions (H x W x D): 88 x 480 x 280mm
• Weight: 12kg
• Rack Mounting: Standard

Our Part #  AMIS120P