Production Intercom HH10-A
Phone Handset with 4-Pin XLR (Black)

HH10-A

Production Intercom's U.S.-made handsets include transducers that are suitable for intercom use.  To prevent feedback and permit high levels, the interior of the handset is partially filled with a dense mastic material, blocking acoustic coupling between the microphone and the earspeaker.  A high quality shielded coil cord is then fitted.

The HH10/A consists of the handset with push-to-talk switch, equipped with a coil cord and 4-pin XLR connector, and a wall mount cradle with retaining spring-clip, as shown in the photo above.

This handset is molded from telephone quality Marbon Cyolac®.  No other handset offered for intercom use provides greater resistance to physical damage.  The cradle includes a spring-clip, which prevents the handset from being accidentally, dislodged.

The HH10/A is compatible with Clear-Com® and other lesser known headset intercom systems.

Specifications:

• Earspeaker:
  Impedance: 150ohm @1kHz
  Frequency Response: 200~3200Hz
  Sensitivity: nominal 116dB @ 1kHz
• Microphone: Dynamic
  Impedance: 150ohm @1kHz
  Frequency Response: 300~4.5kHz
  Sensitivity: nominal 51dB @ 1kHz
• Weight (Excluding connector & cradle): Approximately 12.5 oz. (354 g)
• Coil Cord: Extended length - 6 ft. (1.83 m)

Our Part #  HH10-A