Lexicon U42S

Featuring newly designed dbx® microphone preamps on every channel, the I·ONIX U42S is more than equipped to produce professional recordings.  The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range.  Performance driven A/D - D/A converters ensure pristine 24bit/96kHz audio to capture every detail of your performance.

The Pantheonâ„¢ II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, and 35 factory presets that range from Vocal to Live Sound and Special Effects.

Features:

• USB 2.0 Connection to DAW - up to 480Mbps
• 44.1 to 96 kHz sample rates, 24-bit resolution
• Analog 1/4" and XLR combi-jacks inputs for mic/line inputs
• Analog 1/4" TRS (Stereo Main) outputs
• dbx high-voltage, ultra-low noise mic preamp's on all analog mic/lin inputs
• Supports Windows and Mac platforms
• 48V phantom power for each input pair
• Input signal metering via 8 LED's per channel
• Signal mixing aqnd stereo bus signal metering
• 1/4" high output headphone connection(s)
• MIDI In/Out
• Zero latency monitoring
• Low latency ASIO drivers
• Lexicon Pantheon II VST/AU reverb plug-in
• Software suite includes Steibnberg's Cubase LE4, and Toontrack EZdrummer Lite

Specifications:

• Combi-jack Analog Inputs: 4
• Max. Amt. of Simultaneous Recording Sources Possible: 6
• Microphone Preamps: 4
• Hi-Z Instrument Inputs: 2
• S/PDIF: Yes
• MIDI: Yes
• Headphone Connections: 2
• 1/4" TRS Analog Outputs: 2
• Microphone Inputs: Female XLR Pin 2 Hot
• Input Impedance: 3kOhms balanced
• Phantom Power: +48 Volts
• Maximum gain: +55 dB
• E.I.N. (at max gain): -127 dB @ 55dB gain typical (150O source) -130 dB @ 55dB gain typical A-weighted (150 Ohm source)
• Maximum Input Level: +8 dBu
• Frequency Response: +/-1.5 dB, 20Hz - 20kHz
• THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, -6 dBu
• Line Inputs: 1/4" TRS balanced or unbalanced
• Input Impedance: 20kOhm balanced, 13kOhm unbalanced
• Maximum Input Level: +18 dBu
• Frequency Response: +/-1.5 dB, 20Hz - 20kHz
• THD+N: <0.02%, 20Hz - 20kHz, <0.002%, 1kHz, +18 dBu
• Instrument Input: 1/4" TS unbalanced
• Input Impedance: 1MOhm
• Maximum Input Level: +10 dBu
• Frequency Response: +/-2.5 dB, 20Hz - 20kHz
• THD+N: <0.08%, 1kHz, +4 dBu
• Line Outputs: 1/4" TRS balanced or unbalanced
• Level: +18 dBu maximum
• Impedance: 32Ohm Balanced, 16Ohm Unbalanced
• Headphone Output: 1/4" stereo jack 250mW per channel at 50Ohm
• MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out
• Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
• Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
• Dynamic Range: D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
• Dynamic Range: A/D/A (24 Bit) 106 dB typical, A-weighted, 20Hz - 20kHz
• Power Requirements: Power adaptors available for 100 – 240 VAC, 50/60 Hz, 15 Watts

TMGR# U42S