Yorkville CU15FH
Flying Hardware to link 2 CU15

CU15FH

The CU15 enclosures are equipped with flypoints for overhead suspension applications. The CU15FH hardware kit has been specifically designed to expand the enclosure’s already advanced mounting capabilities.

The CU15FH installation system is the ideal installation solution for installing CU15 enclosures in multi-box arrays. The CU15FH kit allows enclosures to be mounted in two or more cabinet arrays with greater ease than employing individual three-point hangs for each cabinet. The CU15FH is easily mounted strategically to the top and bottom of the enclosure.

A single CU15FH kit allows a pair of CU15 cabinets to be clustered in a tight-pack array at their optimum splay and more can be attached together for larger clusters (3 or more enclosures). The staggered hole pattern in the CU15FH allows for a multitude of downward-tilting angles simply by moving the shackle towards the rear of the cabinet array. If further down-tilt is required, simply attach an eyebolt in the pullback position of the CU15 and use a cable to pullback the cabinet until the desired angle has been achieved.

Our Part #  CU15FH