Toft Audio Designs ATB-24A
Mixer, 24 Channels

ATB-24A

The Toft ATB 24 is a standard analog console with 24 channels. The ATB console packs the same powerful equalizer that was used on the Trident Series 80 boards. The ATB's EQ section is regarded as one of the best sounding equalizers on the market today! The four-band EQ unleashes all your creativity without any limits or boundaries. The ATB equalizer is your ultimate tool in your arsenal.

Reinforced Metal Standoffs
"Snap-in clip" type potentiometers: This type of pot has a metal frame which solders to the PCB , thereby providing structural support for the terminals. Think of it like each pot having its own little suit of armor protecting it from all manner of vibration, torsions and undue pressure...this change evolved to make the board more rugged and able to take more abuse!

More Structural Support
The ATB chassis has received a lot of attention from the engineers at Toft Audio Designs and boasts an interlocking brace system which provides precise vertical alignment for each channel card while mechanically decoupling them from stress on all axes. Think of this as a architectural retrofit that keeps the guts of the board more protected.

Multi Color Solo/Mute LED
No more frantic fingers running up and down the board to find that one depressed solo switch. The mute indicator is a tri-color LED, which provides a channel-specific visual cue of "mute", "solo" and "mute-solo" states.

Balanced Through and Through
The ATB consoles feature balanced direct outs and monitor outs. Offering users the features they request, Toft Audio Designs insures that your projects get done with the quality and performance you expect out of a console descended from a long and successful heritage.

Features:

• 24 Premium Channel Strip Module
• 8 Mix Busses with outputs
• Direct Outs on every channel
• Inline Monitoring for every input channel strip
• Additional 8 Monitor Returns in Group Section
• Vintage Series 80 EQ for every input channel
• 6 Aux Sends every input channel strip
• 8 Fully-Dedicated Stero Aux Returns
• Super Accurate 12-Stage LED Meter
• Optional Meter Bridge
• Optional ADAT/SPDIF digtial output
• Fully balanced outputs

Specifications:

• Input Impedance
  Microphone Impedance: >1.2K ohm balanced
  Line Impedance: >15k ohm electronically balanced
• Output Impedance
  Line Impedance: <100 ohms balanced/unbalanced
• Gain
  Microphone Gain: 70dB
  Line Gain: -16 to +30dB
• Noise Levels
  Microphone Input Noise: <-128dBu ref 150 ohm(20Hz-20kHz)
  Line Input Noise: <-75dBu (Eq. In, 20Hz-20kHz)
• Maximum Mic Levels
  Mic Input: <+24dBu at all frequencies
  LineInput: <+24dBu at all frequencies

Our Part #  ATB-24A