Crown 140MAX-PACK

With the 140MAx PACK, adding a professional business music system to your place of business has never been simpler, or more affordable. Crown's 140MAx PACK is a complete business music system - ready to go out of the box with everything you need including speaker wire and all necessary accessories.

Features

• Ideal for commercial and industrial use; can be installed by the user
• 4 inputs, one input volume control, and one 40W amplifier output channel
• Balanced Phoenix-type mic/line input; XLR-type mic input, dual RCA stereo music inputs, screw-terminal speaker outputs
• Priority ducking
• XM Radio Music-On-Hold outputs
• Two JBL Control 1S 2-way 8-ohm speakers with cables included
• One-Year, No-Fault, Fully Transferable warranty completely protects your investment and guarantees its specifications

Specifications

• Minimum Guaranteed Power Into 4 ohms: 40W
• Frequency Response (at 1W from 4-ohm tap): 80Hz-15kHz +/-1dB
• Power Bandwidth (at 4-ohm tap, 2dB below maximum 1kHz power): 80Hz to 20kHz with <0.5% THD
• Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85dB
• DC Output Offset: <+/-5mV
• THD: Less than 0.5% at rated power at 1kHz
• Input Sensitivity (for full output at maximum gain):
  Balanced mic inputs: 3mV
  Balanced line inputs: 800mV
  RCA connectors: 400mV
  Telephone connector: 75mV
• Input Impedance (nominal):
  Mic: 400 ohms
  Line: 100k ohms
  RCA: 50k ohms
  Telephone: 600 ohms
• Crosstalk: -70dB at 1kHz
• Line Output Level (nominal): 1V into 10k ohms
• Phantom Power: 15 VDC
• AC Line Voltages Available: 120V, 60Hz, Line Voltage Tolerance +10%, -20%
• Operating Temperature: –20° C to 85° C
• Cooling: Convection cooled
• Current Limit Protection: included
• Thermal Limit Protection: Over-temperature thermal cutout
• DC-Fault Load Protection: included
• Dimensions:
  Width (without rack ears): 17.3"
  Height (front panel): 3.5"
  Height (including feet): 4.1"
  Depth (front panel to back panel): 12.2"
  Depth (front of knobs to back of non-touch cover): 13.9"
• Net Weight, 140MAx: 20 lbs
• Shipping Weight, complete system: 43 lbs
• Included Accessories:
  Phoenix-type connectors
  Spade lugs
  XM antenna
  Remote control

Front Panel Controls and Indicators

• Power Switch: Pushbutton on-off switch
• Input Volume Control (Levels): One detented encoder with knob. Microphone/line (switchable)
• XM Tuner Menu Button: Selects Direct, Preset or Category mode
• XM Tuner Category Buttons: Scrolls through categories (rock, classical, news, country, etc)
• XM Tuner Scroll Knob: Lets you scroll through channels and select them
• XM Tuner Display: LCD screen displays XM Radio channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength
• Power Indicator: Blue LED indicates power on

Back Panel Controls, Connectors and Indicators

• MOH 1V Level Control: Trim pot adjusts level for Music-On-Hold 1V output
• MOH Signal Presence Indicator: Flashes when MOH signal is present
• MOH 1V Line Output RCA Connectors: Two RCA connectors (mono) for 1-volt output (in parallel with 600-ohm connectors, so they are isolated)
• MOH 1V Line Output Phoenix Connector: 3-pin Phoenix connector, 600-ohm transformer-isolated output, provides Music-On-Hold signal of approximately 1 volt
• Amplifier Output Connectors: 2-position terminal strip with COM (Common) and 4-ohm terminals. Accepts up to 10 AWG crimp-on terminal forks. Non-touch cover included.
• AC Power Cable: Permanently attached
• XM Radio Stereo Line Out Connector: Dual RCA jacks for stereo music out from XM Radio tuner.
• Priority Connector: 3-pin Phoenix-type connector for push-to-talk mic switch. Contact closure activates ducking. Ducking does not affect Music-On-Hold outputs or XM stereo line out
• Active Indicator: LED illuminates when VOX ducking is active
• VOX Threshold: Trim pot adjusts how loud the voice must be before ducking occurs. Can be set for no ducking.
• Priority Release Control: Trim pot adjusts release time of VOX ducking
• Mic/Line Input Connector: 3-pin Phoenix-type, balanced
• Mic Input Connector: XLR-type, balanced
• Phantom Power Switch: Turns phantom power on or off for Phoenix-type input connector and XLR input connector
• Mic/Line Switch: Selects mic-level or line-level signal for Phoenix-type input
• Dual RCA Input Connector: For stereo music signals, unbalanced, summed together, two connectors per input
• TEL Input Connector: Transformer-isolated 600 ohm input, summed into input for paging from a telephone system
• XM Radio Antenna Connector: Connects to XM antenna cable
• RS-232 Port: Not currently active. For future diagnostics use.

JBL Control 1S Loudspeaker Specifications

• Frequency Range: 70Hz-20kHz (-10dB)
• Power Capacity: 150 Watts (test signal of IEC filtered random noise with a peak-to-average ratio of 6dB, 2 hrs duration)
• Sensitivity: 87dB/1W/1m
• Nominal Impedance: 8 ohms
• Crossover Frequency: 6kHz
• Components: 5 1/4" low frequency loudspeaker; 3/4" polycarbonate dome tweeter
• Enclosure Material: Structural foam
• Finish: Black, grey or white
• Termination: Spring terminal (adapted to accept dual banana plugs)
• Dimensions (H x W x D): 9.25" x 6.25" x 5.625"
• Net Weight (each): 8 lbs
• Included Accessories: Two 25-ft. speaker cables with spade lugs on the amplifier end and bare wires on the loudspeaker end; MTC-1A Wall/Ceiling Mount

TMGR# 140MAX-PACK