Yorkville LS1208B
18" Subwoofer, 1000 Watts @ 8 Ohms, Black Ultrathane Painted Finish

Note: Image shown is the carpeted finish.

A two year investigation into the optimization of high output low frequency sound has yielded the LS1208 “basspipe” subwoofer system. The "basspipe" is a multiple flare horn, connected to an organ like pipe, slowly flaring to the mouth. The bandwidth is narrowed, optimized to a specific range in the lower registers. Outdoor measurements show very smooth, very high output in the 35Hz to 200Hz range. This is the highest efficiency that we have ever seen for a single 18” driver enclosure, especially with a gross volume of only 22 cubic feet. In addition, a significant gain is achieved when using two units side by side as the mouth nears maximum acoustic load.

Additional research has developed a woofer with significantly higher power handling than any other speaker that we currently use, making the LS1208 one of the highest output subwoofers available at any price. Performance, packaging, and overall value make the LS1208 a benchmark.

Suitable for touring or fixed installations, the cabinets are constructed of 15mm 11-ply Baltic Birch with heavy internal bracing for reduced resonance and better durability. The enclosure is covered in a black carpet covering and incorporates metal corner protectors, rugged curved anti-resonant metal grilles, and 1/4" or Speakon™ input connectors. An optional finish of black ultrathane paint (LS1208B) is also available. Additionally, the Speakon™ connectors feature a configuration switch which allows instant reversal of Speakon™ jack pinouts for easy single wire hook-up using optional four wire Speakon™ cables. The LS1208 includes tilt-back wheels and top/rear mounted corner handles for better maneuverability and stacking.

Features:

• 4000 Watt 18-inch Subwoofer (2000 Watts Program)
• Max SPL 139dB Peak (136dB Continuous)
• Horn-Loaded Bass-Pipe Cabinet Design
• 8 Ohm Design for Easy Amplifier Configuration
• 35Hz – 200Hz Frequency Response
• 2 x Speakon™ and 2 x 1/4-inch Parallel Inputs
• Solid 5/8-inch (15mm) Birch Plywood Construction
• Made in Canada

Specifications:

• System Type Horn Loaded Subwoofer
• Active or Passive Passive
• Program Power (Watts) 2000 Watts (4000 Peak / 1000 Continuous)
• Nominal Impedance (Ohms) 8
• Sensitivity (dB @1Watt/1m) 105
• Max SPL (dB) 139dB Peak (136dB Continuous)
• Frequency Response (Hz +/- 3db) 35 - 200
• Driver Configuration 18-inch Ceramic Magnet w/4-inch Voicecoil
• Inputs - 1/4" Jacks 2
• Inputs - Speakon 4-pin 2
• Other Controls / Features Speakon™ connectors feature a configuration switch which allows instant reversal of Speakon™ jack pinouts for easy single wire hook-up using optional four wire Speakon™ cables.
• Corners Black Steel
• Wheels 2 Rear
• Bar Handles 2 Top, 2 Side
• Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
• Grille Heavy gauge perforated metal
• Covering / Black Ultrathane Painted Finish
• Dimensions (DWH xbackW, inches) 33 x 28 x 43.5
• Dimensions (DWH xbackW, cm) 83.8 x 71 x 110.5
• Weight (lbs/kg) 181.7 / 82.4

* Specifications subject to change without notice