Yorkville E10P
10" Speaker, 350W Powered, Black Ozite Carpet Finish

E10P

The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety of pro-audio applications. Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source.

A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).

A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and linear high-frequency response powers the 1-inch horn. An on-board active DSP based crossover ensures that the woofer and horn operate optimally while protecting the high quality speaker components.

The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium magnet, a silky-smooth 1-inch horn and driver and an enclosure built from voidless 15mm multi-ply Baltic birch for light weight with classic Elite ruggedness. That durability is engineered into the multi-angle enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or horizontally as a stage monitor. For added convenience, the E10P easily converts between 120VAC, 230VAC or 240VAC.

Features:

• Integrated 650 Watt Amplifier (Peak - 325 Watts Program)
• 10-inch Woofer / 1-inch Compression Driver
• Max SPL 129dB Peak (123dB Continuous)
• Bi-Amplified Power Module
• Designed for Front-of-House or Monitor Applications
• 100º x 25º Horn with Peak and Average Horn Protection
• Two Band EQ with LF Roll-Off and Live/Playback Mode Switches
• Combi-Jack XLR and 1/4-inch Input
• Integrated All Metal Speaker Standmount Adaptor
• Solid 5/8-inch (15mm) Birch Plywood Construction
• Made in Canada

Specifications:

• System Type Powered Loudspeaker
• Active or Passive Active
• Program Power (Watts) 325 Watts (650 Watts Peak)
• Max SPL (dB) 129dB Peak (123dB Continuous)
• Frequency Response (Hz +/- 3db) 65 - 20k
• Crossover Frequency (Hz) 1500
• Driver Configuration 10-inch / 1-inch
• HF Dispersion (°H x °V) 100 x 25
• HF Protection Peak and Average Limiting
• LF Protection Excursion, RMS
• Cooling Scheme Convection
• Power Cable Removable IEC
• Power Switch Yes
• Power Consumption (typ/max) 120VA / 200VA
• Inputs 1 Combijack (XLR / 1/4-inch)
• Input Impedance (Bal/UnBal) 4k ohms / 2k ohms
• Input Sensitivity (Vrms Sine) Line in 1.4 at center, 0.35 at max
• Level Controls Gain
• EQ Controls Bass, Treble
• Limiter Peak and Average limiting on horn and woofer
• LED Indicators Power, Clip
• Corners Metal
• Feet Plastic Glides
• Flying Hardware 5 (2 Top, 2 Bottom, 1 Pullback)
• Bar Handles One Side
• Pole Mount Adapter (1 3/8"-3.5cm) Yes
• Enclosure Materials 15mm (5/8-inch) 11-ply Russian Birch
• Port(s) Rear
• Grille Perforated Metal
• Covering / Finish Black Ozite (Carpet)
• Optional Covering / Finishes Black Ultrathane Paint (E10PB)
• Dimensions (DWH xbackW, inches) 12 x 13 x 18.5 x 5.5
• Dimensions (DWH xbackW, cm) 30 x 33 x 45 x 14
• Weight (lbs/kg) 34 / 15.5

* Specifications subject to change without notice

Our Part #  E10P