Kramer COBRA-TS2
Multi-Video, Stereo Audio & RS-232 Twisted Pair Transmitter

COBRA-TS2

Kramer's Cobra TS2 is a twisted pair transmitter for multi-format video, stereo or S/PDIF audio and RS-232 signals.  This unit converts composite video, s-Video, component video or computer graphics video, stereo or S/PDIF audio and RS-232 to a twisted pair signal.

Features:

• Bandwidth - Up to WUXGA (1920x1200)
• HDTV Compatible
• Inputs - 15-pin HD (for composite, s-Video, component, & computer graphics video), terminal block for stereo or S/PDIF audio (selected internally by dip switches) and 9-pin D (Tx, Rx, Gnd) for RS-232
• 15-pin HD Input - Use a breakout cable for CV, Y/C & component signals
• Looping Input
• Outputs - RJ-45
• AC or DC Coupling (Selectable)
• Data Mode - 9600 baud (fixed)
• Tru-Sync™ Technology - Ensures accurate sync reproduction over long distance transmission resulting in a stable and properly centered video image on the display
• Sync Settings - Tru-Sync™(default) & fixed
• System Range - Receiver dependent
• Use Kramer BC-HDTP Ultra Low Skew UTP Cable For Best Results
• Compact Kramer TOOLS™ - TM-4 19" Rack Adapter or TMW U-shaped mounting bracket available

Specifications:

• Cable Required: Category 5, 5e, 6 shielded or unshielded twisted pair
• Compliance: CE; FCC Class A, IC Class/class A
• Video Support: VGA, SVGA, XGA, XGA-2, RGBHV, RGB, Composite, S-Video, Component Video modes
• Resolution & Refresh Rate: Up to 1920 x 1200 at up to 60 Hz (receiver dependent)
• Required Source Impedance: Video OUT: 75 ohms; Audio models: Audio OUT: 600 ohms maximum SPDIF audio models: 75 Ohm.
• Required Destination Impedance: Video IN: 75 ohms; Audio models: Audio IN: 600 ohms minimum SPDIF audio models: 75 Ohm.
• Audio Characteristics: Full Stereo; Line Level 600 Ohm Unbalanced
• Serial Characteristics: Protocol: 3 wire, fixed baud rate of 9600.
• Connectors: (1) 4 position terminal block, (1) DB9 F, (1) RJ-45, (2) HD15 F
• Operating Temperature Tolerance: 32 to 104°F (0 to 40°C);
• Storage Temperature Tolerance: -4 to +140°F (-20 to +60°C)
• Humidity Tolerance: Up to 80% noncondensing
• Enclosure: Steel
• Power: +5 VDC; Consumption: 5 watts maximum
• Size: 1.2" H x 4.2" W x 4.3" D (3.1 x 10.4 x 10.9 cm)
• Weight: 1.0 lb. (0.45 kg)
• MTBF: 100,000 hours

Our Part #  COBRA-TS2