Kramer WP-210AL
Wall Plate, Active, 15-Pin HD, 3.5mm Stereo Audio Lime Amp (with Rear Control)

WP-210AL

Kramer's WP-210AL is a line driver for computer graphics video with resolutions from VGA through UXGA and higher along with and stereo audio signals.  The set-up controls are located on the rear panel.

Features:

• High Bandwidth: 350MHz (-3dB)
• HDTV Compatible
• Advanced Sync Processing: Ensures compatibility with a wide range of computers
• Front Panel Connections: 15-pin HD (for VGA/UXGA) and 3.5mm (for stereo audio) inputs
• Rear Panel Connections: 5 BNCs and terminal block (for Balanced stereo audio)
• Looping Input: 15-pin HD
• Input Signal Termination
• Rear Panel Controls: All controls are located on the rear panel to prevent mis-adjustment after proper set up.
• Level (Gain) and EQ (Peaking Controls
• Selectable Sync Input Impedance: 75 Ohms (analog) or 510 Ohms (TTL)
• Audio Level Controls: Left & Right
• Active Input LED Indicator
• ID Bit Control
• Wall Plate Size: Single gang

Specifications:

• Inputs:
  Video: Looping analog red, green, blue signals: 0.7 Vpp/75?, H and V sync, TTL level, on an HD15F connector
  Audio: Unbalanced stereo 3.5mm mini jack
• Outputs:
  Video: 1 RGBHV on 5 BNC connectors; loop on an HD15F connector
  Audio: Balanced stereo on a 5-pole terminal block connector
• Maximum Output Level:
  Video: 1.7Vpp
  Audio: 5.3Vpp
• Bandwidth (-3dB):
  Video: 350MHz
  Audio: >100kHz
• Diff. Gain: 0.05%
• Diff. Phase: 0.05 Deg.
• K-Factor: <0.05%
• S/N Ratio:
  Video: 77dB
  Audio: 78dB
• Controls:
  Video: Cable EQ. control: 0dB to +7.3dB @ 50 MHz; Level control: -1dB to +6.8dB
  Audio: Level control: -58dB to +6.1dB
  ID Bit switch
  Loop Term button
  Hs (Horizontal) and Vs (Vertical) Sync switches
• Coupling: AC
• Audio THD + Noise: 0.022%
• Audio 2nd Harmonic: 0.008%
• Power Source: 12 VDC, 110mA
• Dimensions: 2.72" W x 1.97" D x 4.49" H  (6.9 x 5.0 x 11.4 cm)
• Weight: 0.67 lbs. (0.3 kg) approx.
• Accessories: Power supply

Our Part #  WP-210AL