Neutrik NO2-4FDW-1
opticalCON Chassis Connector (IP65 Rated)

NO2-4FDW-1

Chassis connector with hard Nickel plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65, front panel mount

The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear.  It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.  Colored sealings are included to identify the fiber mode.

Features:

• Designed as feedthrough with automatic sealing shutter
• Shutter with silicone gasket protects optical connection from dust an dirt
• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
• Accommodates standard LC connectors on the rear for simple installation
• Connection on the front side either by rugged opticalCON or standard LC connector
• In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
• Color coding to identify fiber mode:
  Multimode - black
  Singlemode PC - blue
  Singlemode APC - green

Specifications:

• Connector Type: OpticalCon
• Gender: female
• Contact resistance:  < 7 mOhm (after lifetime)
• Dielectric strength: 1.5 kVdc (peak) 
• Insulation resistance: > 2 GOhm (initial)
• Insulation resistance: > 1 GOhm (after damp heat test)
• Rated current per contact: 3 A
• Rated voltage: 50 V
  NOTE: Not compatible to the SMPTE standard, suitable for indoor studio applications acc. IEC 60664-1 (pollution degree 1, over voltage category 1)
• Ground contact: Faston 2.8 x 0.5 (soldering possible)
• Lifetime: > 1000 mating cycles
• Wiring: Solder Contacts 
• Locking device: Push-pull
• Mounting direction: front
• Chassis shape: D
• Contact plating: 0.2 µm Au over 2 µm Ni
• Contacts: Bronze (CuSn6) 
• Insert: Polyamide (PA 6, PBT 30% GR, PBT 50% GR) 
• Shell: Zinc diecast (ZnAl4Cu1)
• Shell plating: Optalloy®
• Split sleeve: ceramics
• Flammability: UL 94 HB
• Protection class: IP 65
• Solderability: Complies with IEC 68-2-20
• Temperature range: -30 °C to +80 °C
• Fiber type: Multimode, Singlemode PC, Singlemode APC
• Insertion loss: < 0.5 dB / connection
• Optical connector: LC-Duplex feedthrough

Our Part #  NO2-4FDW-1